In addition to Weibo, there is also WeChat
Please pay attention
WeChat public account
Shulou
2025-01-15 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Internet Technology >
Share
Shulou(Shulou.com)05/31 Report--
This article mainly shows you the "notebook computer how to solve the motherboard BIOS often reset problem", the content is easy to understand, clear, hope to help you solve the doubt, the following let the editor lead you to study and learn "how to solve the motherboard BIOS frequent reset problem" this article.
1. Check the jumper
The motherboard is designed to clear the CMOS content of the jumper, if the jumper is inserted incorrectly, or the jumper cap falls off, then the BIOS naturally cannot be saved and will be emptied every time it is booted. So first of all, we asked the user to compare the motherboard instructions to find the location of the jumper, but found that the jumper cap was correctly placed here, obviously not the problem.
2. Detect shrapnel
Although the user has replaced the new battery, is it possible that the battery base is not working so that the battery cannot power the motherboard at all? We asked the user to carefully examine the battery holder on the motherboard, especially the shrapnel at the bottom. The shrapnel is flexible and can be in good contact with the battery, and the battery power supply is not the cause of the problem.
3. Electrostatic interference
Is it possible that a large amount of static electricity has been accumulated on the motherboard, causing interference to the motherboard circuit? We also let the user find a wire and tie it to the chassis shell to release static electricity, but it still has no effect.
4. Check the motherboard for leakage
The start-up and daily use of the motherboard are normal, so we will not consider the failure of the motherboard for the time being. The user's motherboard has been used for many years, will there be leakage of electricity in some components? For this reason, we suggest that the user remove the motherboard and pad some insulating rubber pads on the screw installation hole below. The problem is solved, and BIOS can finally save the information.
The above is all the contents of this article entitled "how to solve the problem of frequent reset of motherboard BIOS in notebook computer". Thank you for reading! I believe we all have a certain understanding, hope to share the content to help you, if you want to learn more knowledge, welcome to follow the industry information channel!
Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.
Views: 0
*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.
Continue with the installation of the previous hadoop.First, install zookooper1. Decompress zookoope
"Every 5-10 years, there's a rare product, a really special, very unusual product that's the most un
© 2024 shulou.com SLNews company. All rights reserved.