Shulou(Shulou.com)05/31 Report--

This is a good new flagship phone with dual cameras and large battery capacity. So, how to install / insert the card? This is what many users need to pay attention to. Next, Bian Shaw brings you a SIM card installation tutorial, hoping to help you.

SIM card installation method steps:

Step 1: first find the attached needle clamp accessories in the packaging accessories.

Step 2: insert the card pin into the SIM card holder on the upper left side of the fuselage to take the card hole, push the pop-up card holder vigorously, and the card holder can be easily removed.

Step 3: load one or two prepared Nano SIM cards into the card holder, and then insert the SIM card into the slot of the mobile phone card.

Step 4: to complete the above operation, the operator's network signal strength sign can be seen on the left side of the top battery display. If you can see the network signal sign shown in the picture, it means that the card has been installed successfully, and then you can communicate on the Internet normally.

Support all new Netcom, can support China Mobile, China Unicom, China Telecom. Traveling abroad can not only choose Flyme international traffic, but also roam directly, which is more convenient to use.

Recently, this new phone has been released, and the low price of 899 yuan allows many netizens to buy one. In today's tutorial, we will share. First of all, let's share the screenshot method. So, how do you capture the screen? Come and see!

Screenshot method 1: quick screenshot.

As we all know, the most common way to take screenshots on Android smartphones is to use shortcut keys, that is, to use the power button volume-while holding down the button.

Quick screenshot method: press and hold the [power key] [volume key] on the right side of the fuselage at the same time. When you hear a click or the screen flashes, the screenshot is successful.

Screenshot method 2: drop-down shortcut menu screenshot.

Run 360OS3.0, which is deeply customized based on Android 7.1. In the interface where you need to take a screenshot, just pull up the shortcut page in the drop-down of the screen and click the "Screenshot" shortcut switch button. It is also very convenient to take a screenshot, as shown in the figure.

Ps: after taking a screenshot, the system will display a screenshot in the notification bar. Click to view directly, or go to the album to find the picture you just took.

Screenshot method three: three fingers screenshot.

In addition to the above two methods, it also provides a more personalized three-finger screenshot method, drawing on Nubian mobile phones.

First enter the system setup-General-Intelligent Control-Action Peace door, and then open the "three-finger Screenshot" button switch.

Then open the screenshot interface in the mobile phone, and then swipe the screenshot up and down with three fingers, which is very personalized and convenient.

Screenshot method 4: use APP or mobile phone assistant to take screenshots.

For example, you can install QQ Browser or Baidu browser on your mobile phone, and you can take screenshots with the help of the browser.

In addition, the mobile phone can be connected to the computer, and the mobile assistant in the computer can easily take screenshots of the N4A of 360 mobile phones in the computer.

Solemnly declare that the copyright of this article belongs to the original author. This article was reprinted just to spread more information. If the author's information is incorrectly marked, please contact us immediately for modification or deletion. Thank you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.