Shulou(Shulou.com)06/01 Report--

Editor to share with you how to install VMware Centos8 system, I believe that most people do not know much about it, so share this article for your reference, I hope you can learn a lot after reading this article, let's go to know it!

Software and system mirroring

Software: VMware 14

Mirror: CentOS8

Download address of the official website of the image:

Http://mirror.jdcloud.com/centos/8.0.1905/isos/x86_64/CentOS-8-x86_64-1905-dvd1.iso

The desktop mode interface is as follows (part 3, step 11 selection: server or workstation with GUI):

Second, create a virtual machine

1. Open VMware and select create a new virtual machine.

2. Select Custom (Advanced) (C) for the next step.

3. Next step.

4. Choose a little

After installing the operating system, the next step.

5. Select

Linux, version, next step.

6. Set the virtual machine name and storage location according to your own needs, the next step.

7. Set the appropriate number of processors according to the configuration of your computer. (install a graphical desktop system and set it as large as possible)

8. Set the appropriate memory size according to the configuration of your computer. (install a graphical desktop system and set it as large as possible)

9. Set the virtual machine network connection mode. (NAT)

10. Select the Imax O controller type, and next step.

11. Select the disk type, next.

12. Select to create a new virtual disk, next.

13. Allocate disk capacity according to your own needs, check to split the virtual disk into multiple files (to facilitate copying the virtual machine to other devices with storage devices), and next step.

14. Specify the storage location of disk files. Next.

15. Select custom hardware here, or you can set up the processor and memory. Because of the planned installation of a graphical desktop system (which takes up a lot of system resources), CPU4 cores and 4G of memory are allocated.

16. Click finish, and the virtual machine is created.

Third, install CentOS8

1. Right-click the virtual machine you just created and select Settings.

2. Select CD/DVD, check the connection at startup, and then select to use the ISO image file. Finally, select browse, find the downloaded system image file, and finally determine.

3. Turn on this virtual machine.

4. After opening the virtual machine, the following interface appears, the mouse clicks into the black window, use the keyboard key to select the first item, install CentOS 8, enter, and the system begins to install automatically.

5. Select the language to be used in the installation process. Here, select Chinese or simplified Chinese (China), and click continue.

6. Click the network and hostname to set up the network.

7. First turn on the Nic switch, and then check to see if you can get the IP address (the virtual machine network adapter uses NAT mode by default), change the hostname, click apply, and click finish.

Click the date and time (T) to set the system date and time.

9. Select Asia and Shanghai in the time zone, set the correct date and time, turn on the network time switch (if the host is already connected to the Internet, the time will be automatically calibrated), and then click finish.

10. Click Software selection (S) to select the software system that needs to be installed.

Select the server or workstation with GUI here (enter the graphical desktop system after installation) and click finish. (if you choose a server or a minimum installation or custom operating system virtualization host, enter the command line system after the installation is complete.

12. Select the installation destination (disk partition can be done here).

Select the partition I want to configure, and then click finish.

14. Pop up the interface of the following figure, click the plus sign, select / boot, divide the boot into 200m, and finally click to add the mount point.

15. Then allocate space to other partitions in the same way, and click finish when the allocation is complete.

16. Pop up the summary of changes and click to accept the changes.

17. Choose to start the installation.

Click the ROOT password.

19. Click finish after setting the ROOT password.

Click to create users.

21. Enter the user name and password and click finish (you can set this account as an administrator).

22. Wait for the system to be installed and restart.

Log in to the system

1. After the system is rebooted, go to the following interface and click LICENS INFORMATION.

2. Select I agree to the license agreement and click finish.

3. Click to end the configuration.

4. The following interface appears, click not listed?

5. Enter your root account, and next step.

6. Enter your password and click Log in.

7. After logging in successfully, enter the graphical desktop system, select Chinese, and click forward.

8. According to your own needs, select the language, keyboard and location service to enable or skip connecting to your online account, and click start to use the system normally.

9. Click to start using Centos when the settings are complete.

10, you can watch the demonstration of the use of the system, click close and you can begin to explore the use of the system.

11. Turn off the phone.

5. Configure fixed IP to facilitate remote management

1. Set the network card mode of the virtual machine. Click Edit Virtual Machine Settings.

2. Click the network adapter, select the connection at startup, select the bridging mode, and click OK.

3. The bridging mode of the network adapter is set successfully, as shown in the following figure.

4. Click Edit, and click the virtual network editor.

5. Click to change the settings in the pop-up interface.

6. the pop-up interface, select the bridge mode, please select the actual network card interface, and then click OK. Because I often encounter the problem that the bridge mode is selected automatically, but the system is unable to connect to the network, I still choose the actual network card interface.

7. Start the virtual machine, click the network icon in the upper right corner, click Wired, and click Wired Settings.

8. Pop up the settings interface and click the settings icon on the cable below.

9. Click the IPv4 tab, set the manual IP address, set Addresses (virtual machine IP address, subnet mask, gateway), set DNS, and finally click apply.

10. The lines in the red box below are closed, then opened, and finally the interface is closed. (equivalent to restarting the network)

Click activity, and click to open the browser or terminal.

12, testing, normal networking. (provided that the host is already connected to the network). # ping-c 3 www.baidu.com

13. PuTTY remote login.

The above is all the contents of the article "how to install the Centos8 system in VMware". Thank you for reading! I believe we all have a certain understanding, hope to share the content to help you, if you want to learn more knowledge, welcome to follow the industry information channel!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.