Shulou(Shulou.com)06/02 Report--

This article mainly introduces the method of realizing mirror symmetry in cad, which has certain reference value and can be used for reference by friends who need it. I hope you will learn a lot after reading this article. Next, let the editor take you to learn about it.

The method of cad to achieve mirror symmetry: first open cad and draw two construction lines; then draw the left half of the symmetry graph on the left side of the construction line; then click the mirror symmetry tool on the upper right; finally, select all the segments and graphics to be symmetrical.

Cad method to achieve image symmetry:

1. Open cad

2. Draw two construction lines first, as shown in the following figure

3. Draw the left half of the symmetrical figure on the left side of the construction line, as shown in the example in the figure

4. next, first click the mirror symmetry tool on the upper right, and then when the mouse becomes square, select all the segments and graphics that want to be symmetrical, enter once (indicate OK), and then, according to the prompt on the lower left, specify the two points of the symmetry line (two points determine the straight line). Finally, there is a line at the bottom left

"do you want to delete the source object? [yes / No]:" if you want to keep the left half of the just drawn directly enter or enter n, if you want to delete the left half of the just drawn, leave only the right half, enter y enter

Thank you for reading this article carefully. I hope it will be helpful for everyone to share the method of mirror symmetry in cad. At the same time, I also hope that you will support us, pay attention to the industry information channel, and find out if you encounter problems. Detailed solutions are waiting for you to learn!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.