In addition to Weibo, there is also WeChat
Please pay attention
WeChat public account
Shulou
2025-04-09 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Internet Technology >
Share
Shulou(Shulou.com)06/01 Report--
This article mainly introduces "what is the burning method of Android6.0.1 device tree image". In daily operation, I believe that many people have doubts about what the burning method of Android6.0.1 device tree image is. The editor consulted all kinds of materials and sorted out a simple and easy-to-use operation method. I hope it will be helpful to answer the doubt of "what is the burning method of Android6.0.1 device tree image?" Next, please follow the editor to study!
Based on the three hardware versions of-iMX6D, iMX6Q and iMX6PLUS, the burning method of the device tree image and the directory where the image is located are all the same, so the burning chapters are merged together.
Please note that if you buy the iMX6D version and want to burn the device tree version image, use the iMX6D device tree version CD (iMX6D also has a non-device tree version CD); if you buy the iMX6Q version and want to burn the device tree version image, use the iMX6Q device tree version CD (iMX6Q also has a non-device tree version CD); if you buy the PLUS version, use the PLUS version. The burning tool is the "android_m6.0.1_2.0.0_ga_tool_20190412.7z" package under the "02 compiler and burning tools\ burning tools" directory of the kernel CD material of the iMX6D/Q/PLUS device tree (the red date may change). Unzip the package and enter the folder "mfgtools".
Among them, "MfgTool2.exe" is a burning tool, which needs to copy the image and identify it to the development board before it can be opened for normal use. "cfg.ini" is a configuration file, open "cfg.ini", as shown in the following figure, make sure that the parameter after "[LIST]" is Android.
The compiled Android6.0.1 image is located in the "03 image _ android 6.0.1 file system" directory of the imx6q/plus device tree kernel CD material. It is divided into 1G and 2G images, and users use the corresponding images according to the size of hardware memory.
Here, take the 1GB memory image as an example, copy all the "u-boot.imx", "system.img", "recovery.img" and the remaining "boot-topeet_XXX.img" to the "mfgtools\ Profiles\ Linux\ OS Firmware\ files\ android" directory of the burning tool, as shown in the following figure.
Be sure to perform this step first! Otherwise, the software will report an error when you open the burning tool.
The dialing switch setting of the development board refers to "2.2.1 startup mode setting (dialing switch)" setting to USB burning mode.
Type, connect the otg line, power up the development board. Finally, open the "MfgTool2.exe" tool in the "mfgtools" directory (if it is a win10 system, run in compatibility mode), as shown in the following figure.
Click "Start" to start writing, as shown in the following figure, the burning tool displays a progress bar.
In the process of burning and writing, there will be some printing information on the serial console.
As shown in the following figure, when the burning is complete, click "Stop", and then turn off the burning tool "MfgTool2.exe".
When the development board is powered off, refer to the section "2.2.1 boot mode setting (dial switch)", set the development board to eMMC startup mode, power on, and then refer to the "2.2.2 uboot mode" section to enter uboot mode, as shown in the following figure.
Set system parameters: in the uboot command line, use the command "setenv bootsystem android" to set the environment variable parameter to "Android" startup mode, and then use "saveenv" to save, as shown in the following figure.
Set screen parameters:
As shown in the table above, the user chooses "setup Command" according to the actual screen. For example, if the author is a 9.7inch screen, use "setenv lcdtype 9.7", and then" saveenv "to save the parameters, as shown in the following figure
After the setup is complete, use the "reset" command to restart the development board. After the development board starts, it is the Android6.0 system.
At this point, the study on "what is the burning method of Android6.0.1 device tree image" is over. I hope to be able to solve your doubts. The collocation of theory and practice can better help you learn, go and try it! If you want to continue to learn more related knowledge, please continue to follow the website, the editor will continue to work hard to bring you more practical articles!
Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.
Views: 0
*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.
Continue with the installation of the previous hadoop.First, install zookooper1. Decompress zookoope
"Every 5-10 years, there's a rare product, a really special, very unusual product that's the most un
© 2024 shulou.com SLNews company. All rights reserved.