Shulou(Shulou.com)06/01 Report--

This article mainly shows you the "server trend can not deploy how to do", the content is easy to understand, clear, hope to help you solve doubts, the following let the editor lead you to study and learn "server trend can not deploy how to do" this article.

First, do the following to see if the problem is solved:

1. Check whether C:\ Program Files\ Trend\ SProtect\ GetRemoteVer.dll exists on NS and IS, respectively. If not, copy the file from another running machine.

2. Delete the C:\ Program Files\ Trend\ SProtect\ AC_Up-Rb.tmp folder on NS and IS.

3. Deploy again.

4. If you still report an error, check whether the GetRemoteVer.dll file exists in the C:\ Program Files\ Trend\ SProtect\ AC_Up-Rb.tmp folder of NS. If not, copy the file to this directory.

Second, confirm that the following services of the information server and the standard server are in the starting state.

Remote Registry service

RPC service

RPC locator service

1. Use the ping command to confirm that NS and IS can ping each other, including Ip addresses and domain names (especially domain names).

2. Make sure that the C $of NS and IS servers exists and is shared. Please use the administrator account to make sure that NS and IS can access each other and can read and write files (\\ IP\ C$)

3. On the IS server, go to the SPNT installation directory. Under\ Program\ Files\ Trend\ SProtect, open the TmRPC.ini file and verify that the IP address of the standard server in it is 2.

That is, if the IP of NS is 192.168.2.3, then it should be recorded in tmrpc.ini as follows: 192.168.2.3

4. After confirming all the above configurations, make sure that the firewall between NS and IS allows the following settings:

Http://www.trendmicro.com.cn/corporate/techsupport/solutionbank/solutionDetail.asp?solutionId=62303

5. If the above settings are confirmed, please confirm whether the communication between NS and IS is normal. Run the CDT tool on NS and IS. Analyze the generated CDT log.

Net share command output for IS and NS.

Execute from the command line: net share > c:\ net_share.txt

3. Remove the read-only attribute of the trend folder (trend installation directory)

Fourth, the trend folder (trend installation directory) adds domain administrator permissions and complete control.

(note: the main problem of deploy is three, you can only change three, if not, change four. )

Attached:

Problem description: which ports does ServerProtect 5.58 use for communication?

Solution:

Standard Server (For NT):

5168 (TCP/IP): listening port for communicating with the information server (default protocol)

137-139 (named pipes): communicating with information servers

Standard Server (For NetWare):

9921: listening port for communication with information server

Information server

3628 (TCP/IP): listening port for communicating with standard servers (default protocol)

137139 (named pipes): communicating with a standard server (For NT)

1921: listening port, communicating with standard server (for NW)

5005-5014 (any one): communicate with the console

3000-3009 (any one): communicate with the console (broadcast)

10319: Communicate to TMCM Server

Console

1000-1009 (any one): listening port, communicating with information server

The above is all the contents of the article "Server Trends can't deploy". Thank you for reading! I believe we all have a certain understanding, hope to share the content to help you, if you want to learn more knowledge, welcome to follow the industry information channel!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.