Shulou(Shulou.com)06/02 Report--

OSPF Advanced configuration Topology Diagram

When establishing the topology, the R3 router needs to right-click to select configure, and add two NM-1FE-TX service boards to the Slots.

1. Server-side environment deployment 1. R1 router:

Configure the IP address information for each interface; configure the default route for the stub network and point to the next-hop address information.

Conf tint f0/0ip add 192.168.10.1 255.255.255.0no shutint f0/1ip add 192.168.20.1 255.255.255.0no shutip router 0.0.0.0 0.0.0.0 192.168.20.22, R2 router:

Configure IP address information of each interface, configure OSPF routing protocol, configure static route, inject directly connected network segment information, inject static routing information.

Conf tint f0/0ip add 192.168.30.1 255.255.255.0no shutexint f0/1ip add 192.168.20.2 255.255.255.0no shutrouter ospf 1router-id 2.2.2.2network 192.168.30.0 0.0.255 area 1exip router 192.168.10.0 255.255.255.0 192.168.20.1router ospf 1redistribute connected subnetsredistribute static subnets3, R3 router:

(1) configure the IP address information of each interface

Conf tint f0/0ip add 192.168.30.2 255.255.255.0no shutint f0/1ip add 192.168.40.1 255.255.255.0no shutint f1/0ip add 12.0.0.1 255.255.255.0no shutint f2/0ip add 192.168.70.1 255.255.255.0no shut

(2) configure default route, configure OSPF routing protocol, and inject default route information.

Ip route 0.0.0.0 0.0.0.0 12.0.0.2route ospf 1route-id 3.3.3.3network 192.168.30.0 0.0.0.255 area 1network 192.168.40.0 0.0.0.255 area 0network 192.168.70.0 0.0.0.255 area 0default-information originateex4, R4 router:

(1) configure the IP address information of each interface

Conf tint f0/0ip add 192.168.40.2 255.255.255.0no shutint f0/1ip add 192.168.50.1 255.255.255.0no shut

(2) configure RIP routing protocol, inject OSPF routing protocol information, inject RIP protocol information.

Route ripver 2no auto-summarynetwork 192.168.50.0exrouter ripredis ospf 1 metric 5exrouter ospf 1router-id 4.4.4.4network 192.168.40.0 0.0.0.255 area 0redistribute rip subnets5, R5 router:

Configure IP address information for each interface, configure RIP routing protocol

Conf tint f0/0ip add 192.168.50.2 255.255.255.0no shutint f0/1ip add 192.168.60.1 255.255.255.0no shutrouter ripver 2no auto-summarynetwork 192.168.50.0network 192.168.60.06, R6 router:

Configure IP address information for each interface and configure static routes.

Conf tint f0/0ip add 12.0.0.2 255.255.255.0no shutint f0/1ip add 13.0.0.1 255.255.255.0no shutexip route 192.168.0.0 255.255.0.0 12.0.0.1 II, client environment deployment

1. Host 1 configures IP address and gateway information

2. Host 2 configures IP address and gateway information

3. Host 3 configures IP address and gateway information

4. Host 4 configures IP address and gateway information

3. View routing table information

R1 routing table

R2 routing table

R3 routing tabl

R4 routing tabl

R5 routing tabl

R6 routing tabl

Fourth, verify the interoperability of the whole network

Host 1 can communicate with host 2, host 3 and host 4, and the whole network is interoperable. The experiment is successful!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.