Shulou(Shulou.com)06/01 Report--

Configure AP routing patterns through the WAN port of W815 through a network cable

There are 4 lights only in this device. When the state status indicator is off, it means that it has been started before you can enter the management IP in the browser for configuration operation. (this device has been configured with fat mode of bridging. You only need to go in and encrypt the wireless signal ZTE-ap.)

Please note that steps 4, 5, 6 of this tutorial can be skipped.

1. To enter the setting, you need to use a fixed IP to open a local connection.

two。 Open the browser, enter 192.168.0.128, jump out of the login window, default to the English interface, click Chinese to switch to the Chinese settings interface.

3. Enter the login account is admin password is admin

4. Click management-access point management-access point mode. Select fat mode and click OK. After the restart is complete. Select Network-Broadband Settings-Broadband connection settings, where the default is AP mode.

5. This is the route pattern.

6. The power of the next stage is adjustable. Drop-down can be connected to% ratio, DBM or MW to set power, the default maximum is 500MW.

7. Wireless signal name setting.

8. Wireless encryption.

9. The wireless password should be at least 8 digits or letters.

10.QOS flow control.

11. Restore the factory settings.

twelve。 Login account password setting.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.