Network Security Internet Technology Development Database Servers Mobile Phone Android Software Apple Software Computer Software News IT Information

In addition to Weibo, there is also WeChat

Please pay attention

WeChat public account

Shulou

What is the method of Google Fastboot restart setting for RK3399 embedded development board

2025-01-18 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >

Share

Shulou(Shulou.com)06/01 Report--

This article is to share with you about the RK3399 embedded development board Google Fastboot restart setting method is, the editor thinks it is very practical, so share it with you to learn, I hope you can get something after reading this article, say no more, follow the editor to have a look.

RK3399's CPU adopts big.LITTLE large and small core architecture, double Cortex-A72 large core + four Cortex-A53 small core structure, greatly optimizes integer, floating point, memory, etc., and revolutionizes the overall performance, power consumption and core area. RK3399's GPU uses a new generation of quad-core ARM high-end image processor Mali-T860, integrates more bandwidth compression technologies such as intelligent superposition, ASTC, local pixel storage, etc., and supports more graphics and computing interfaces, with an overall performance improvement of 45% over the previous generation.

Restart

Fastboot oem recovery reboot into recovery

Fastboot oem recovery:wipe_data restart to restore factory settings

Fastboot reboot restart

Fastboot reboot-bootloader restart and enter rockusb to write

Pattern

Fastboot continue restart

1 unlock and lock the equipment

Fastboot oem unlock unlock

Fastboot oem unlock_accept confirms unlocking

(you need to enter within 5 seconds after the fastboot oem unlock command)

Fastboot oem lock locking device

2 Special commands

Fastboot boot [] temporarily booted from the specified firmware

(kernel currently supports Image/zImage. You need to store dtb at the end of kernel or in the resource partition.)

Fastboot oem log acquires serial port log information

Fastboot oem ucmd runs the UBOOT command

The above is the method of RK3399 embedded development board Google Fastboot restart setting. The editor believes that there are some knowledge points that we may see or use in our daily work. I hope you can learn more from this article. For more details, please follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.

Views: 0

*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.

Share To

Servers

Wechat

© 2024 shulou.com SLNews company. All rights reserved.

12
Report