Shulou(Shulou.com)05/31 Report--

This article is about VMware-VCSA-all-6.5.0-4602587 installation to 80% jam prompt rpm installation failed and root password is not set what to do. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

Recently, a set of VMware6.5 has been implemented, and when deploying the VMware-VCSA-all-6.5.0-4602587 version of vcsa, it will not be able to move when the first phase of the installation reaches 80%, indicating that the RPM installation failed. After hard work, the problem was finally solved, and the record is as follows:

1. Fault hints:

1.RPM installation failed

Failed to set 2.root password

Second, the fault handling process: when logging in to vcentor through the control terminal, it is prompted to reset the password, but after setting the password, the prompt setting fails. Reset the password by doing the following:

1. Restart the vcentor virtual machine and enter at the end of the kernel boot option:

After the rw init=/bin/bash is saved, let the system continue to start and enter the GRUB command line interface.

two。 Run the following command from the grub command line:

Chage-l root # this command allows the system to automatically read the password in the configuration file

Passwd-x 100 root # set password expiration time

3. After the modification, unmount the file system and restart the operating system

Umount /

Reboot-f

After the restart, the system password is modified by the control terminal, and after the password is modified, the system begins to install automatically.

Third, the cause of the problem:

During the vcsa installation and deployment, when the installation reaches 80%, the vcentor operating system is installed, and the installation process needs to verify the password of the root account for authentication identification. Log in to esxi through web at this time, and you can see the pop-up authentication failure message in the event report. Only after the authentication is successful, the installation of the RPM package will be started, and the host IP address will be configured finally.

According to my own final verification of the problem, this should be the VMware-VCSA-all-6.5.0-4602587 version of BUG. After changing to other versions, the configuration parameters are installed successfully in the same environment.

Fourth, the experience of the new version of VMware6.5

Because the new VMware6.5 no longer provides VMware vSphere Client, it needs to be managed through web login, and the function of web has many defects, for example, it can not add PCI directly to the virtual machine, but it can be done in esxi web, but this problem does not exist in 6. 0.

According to the actual implementation, it is not recommended to install and deploy VMware-VCSA-all-6.5.0-4602587 version of VCSA in production environment, nor is it recommended to deploy version 6.5 of VMware.

Thank you for reading! About "VMware-VCSA-all-6.5.0-4602587 installation to 80% stuck prompt rpm installation failure and root password is not set what to do" this article is shared here, I hope the above content can be of some help to you, so that you can learn more knowledge, if you think the article is good, you can share it for more people to see it!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.