Network Security Internet Technology Development Database Servers Mobile Phone Android Software Apple Software Computer Software News IT Information

In addition to Weibo, there is also WeChat

Please pay attention

WeChat public account

Shulou

HP-UX MC/SG reported a mistake and shared a case.

2025-01-19 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >

Share

Shulou(Shulou.com)06/03 Report--

Environment: HPUX 11.31 * ServiceGurad A.11.20. Two node:node1,node2; and one package:pkg1.

Host: BL860c i4

Failure phenomenon: pkg1 can normally switch between two node, but when one of the node shuts down, the pkg1 can only run on the node2 for about 1 minute, and then it will automatically failed.

Analysis process:

1. Check the log of pkg1 and the syslog of the system, and no abnormality is found.

two。 Check the application script configured in the pkg control file and find no exception. To facilitate troubleshooting, comment out the application script defined in the control file for the time being.

3. After commenting out, the fault site still exists. Shoulder rub bag configuration file, package control file, still nothing found.

4. Check the cluster configuration file, and compare it with the previous cluster configuration file, and find that there are more SUBNET configuration and IP_MONITOR configuration in the customer's cluster configuration file. Suspect that

For this reason, it is annotated as follows:

# SUBNET 10.73.0.0

# IP_MONITOR OFF

# POLLING_TARGET 10.73.0.1

5. After re-check,apply the cluster configuration file, the problem is resolved.

Summary: after verification, in the cluster configuration file (usually cluster.ascii), you do not need to write the SUBNET parameter (just write MONITORED_SUBNET in the pkg configuration file), nor do you need the IP_MONITOR parameter. If you write SUBNET, be sure to set IP_MONITOR to OFF.

For this kind of fault, the solution is: A. Comment out the SUBNET and IP_MONITOR parameters in the cluster configuration file. two。 If you don't comment, be sure to configure IP_MONITOR as OFF. Recommended method A. The configuration of IP monitoring can be defined in the package configuration file, not in the cluster.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.

Views: 0

*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.

Share To

Servers

Wechat

© 2024 shulou.com SLNews company. All rights reserved.

12
Report