Shulou(Shulou.com)06/02 Report--

Banana pie BPI-M2 Berry quad-core single board computer is developed with holographic R40/V40 chip. Support on-board Wifi and Bluetooth, support SATA interface, can be directly connected to the hard disk. There is an SD card socket on the board, and the system image can be started from the SD card.

Banana PI BPI-M2 Berry has strong compatibility and can run android system, Debian linux,Ubuntu linux system, Raspberry Pi system and Quanzhi TinaLinux system.

Banana PI BPI-M2 Berry hardware: Quan Zhi R40 / V40 quad-core processor, 1GB LPDDR3 memory, gigabit Ethernet port, 4 USB interface running Android5.1 smoothly. Banana PI BPI-M2 Berry is exactly the same size as raspberry pie 3, and you can use the shell of raspberry pie 3 directly. GPIO is compatible with Raspberry Pi 3 and can run rasbian systems.

As a member of the banana pie family, BPI-M2 Berry is a direct upgrade of the banana peel M1 planner M1+ and supports SATA.

The size and interface of the board are the same as those of raspberry pie 3, so you can use accessories such as the shell of raspberry pie 3 directly in BPI-M2 Berry.

Hardware specification sheet HardWare Specification of Banana pi BPI-M2 BerrySocAllwinner R40/V40

CPUquad-core cortex-A7, the most power efficient CPU core ARM's ever development.

GPUdual-core MALI-400 MP2 and runs at 500MHz, capable of 1.1 Gpixel/s throughput. Graphics capabilities are slightly higher than the original Xbox's level of performance. The GPU provides OpenGL ES 2.0, hardware-accelerated OpenVG, 1080p45 H.264 high-profile encode and decode.

SDRAM1GB DDR3 with 733MHz\ (shared with GPU\)

SATAsuppoort SATA interface

GPIO40 Pins Header, 28 × GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S.

On board Network10/100/1000Mbps Ethernet\ (Realtek RTL8211E/D\)

Wifi ModuleWiFi 802.11 b/g/n\ (AP 6212 module on board\)

BluetoothBT4.0

On board StorageMicroSD\ (TF\) card,No eMMC onboard

Display4-lane MIPI DSI display,or RGB panel or LVDS panel,TV-out on HDMI V1.4

VideoMulti-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 decode up to 1080P60 support video encodeing:High-deinition\ (HD\) H.264 video encoder is up to 1080P@45fps

Audio outputsHDMI, analog audio\ (via 3.5 mm TRRS jack\), I2S audio\ (also potentially for audio input\)

CameraA CSI input connector Camera:Supports 8-bit YUV422 CMOS sensor interface,Supports CCIR656 protocol for NTSC and PAL,Supports 5M pixel camera sensor, Supports video capture solution up to 1080p@30fps

Audio inputOn board microphone

USB4 USB 2.0 host, 1 USB 2.0 OTG

ButtonsReset button, Power button, U-boot button

LedsPower status Led and RJ45 Led

IRNo onboard IR receiver

DC Power5V/2A with micro USB port

BatteryNo 3.7V lithium battery power support

Sizes85mmX56mm,same size as raspberry pi 3

Weight40g

Same size as the raspberry pi, you can use a raspberry pie shell:

Metal housing:

Open source wiki documentation:

Http://wiki.banana-pi.org/%E9%A6%99%E8%95%89%E6%B4%BE_BPI-M2_Berry

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.