Shulou(Shulou.com)06/01 Report--

Wdlinux_lnmp server installation process, many novices are not very clear about this, in order to help you solve this problem, the following editor will explain for you in detail, people with this need can come to learn, I hope you can gain something.

Lnmp is the abbreviation of linux+nginx+mysql+php, that is, the environment with lnmp is integrated. When the system is installed, even lnmp is installed.

Wdlinux_lnmp is an ultimate integration package, as well as wdlinux_lamp 's

This article assumes that VM is installed and the ISO file is downloaded.

Note that in the installation of lamp,lnmp, the hard disk space should be at least 30g, and there is no requirement for the base version.

Then click Start this virtual machine on the left to start the installation

Select Yes to start setting IP information, such as IP address, gateway, etc.

1 the network card is activated with the system startup

2 enable IPv4 support

3 enable IPv6 support

Both 1 and 2 are necessary. 3 depending on personal circumstances, IPv6 is now rarely used and basically not used.

1 is to obtain IP dynamically, if there is a DHCP server in the local domain name, you can choose this option.

2 ordinary IP address configuration, need to specify IP address and subnet mask

Gateway and primary DNS, secondary DNS

Set hostname

The password of the root user, which is also the password of the super management

The default system administration user name for linux/unix is root, such as administrator for win system.

The password is set here.

When the system is installed, you can connect remotely through ssh.

When you see this prompt, congratulations, it means that the system has been successfully installed. Enter and start again.

See the above prompt, indicating that the system has been successfully started and is waiting for your login.

Enter the user name: root and password, and enter (note that the password here will not be displayed, but do not think it is stuck, enter after typing, if the password is wrong, you will be prompted to log in again)

The password is the root password just set during the installation.

If you see the [root@ hostname ~] # above, the login is successful.

Check IP with ifconfig

More about the management and operation of ssh will be discussed later.

Now open it with IE, and you will be prompted by the following figure

Including phpinfo information, php probe, phpmyadmin (mysql Manager)

Administrative password for logging in to mysql. The default user password is: root,wdlinux.cn

The default administrative user of mysql is also root, but the root here and the root of the above system have the same name but different people, that is to say, irrelevant. Log in as shown in the following figure

More about the operation of phpmyadmin, which is discussed later

From this phpinfo, you can see that when the system is installed, accelerators such as Zend,eaccelerator are supported by default.

FTP

Install the system and open a wdlinux user by default. The password is: wdlinux.cn

Next, log in with the FTP software to take a look.

The following content will appear in the click connection, which means that the FTP connection is successful and operations such as upload and deletion can be done.

At this point, the installation of the entire system has been completed.

Is it helpful for you to read the above content? If you want to know more about the relevant knowledge or read more related articles, please follow the industry information channel, thank you for your support.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.