Shulou(Shulou.com)06/01 Report--

PRG PAULIN v2011 1CD (professional pressure vessels and piping finite element)

Contains the following modules:

Nozzle/Pro 8.5

FE/Pipe 6.5

BOS Fluids 4.6

PCLGold v.4.0.2

FEPipe v4.111 1CD (finite element analysis software for piping and equipment)

The interface of the world famous pipeline stress analysis software TRIFLEX allows the rod element model to be read into FE/pipe for analysis, and the interaction with the shell model in FE/PIPE is considered.

The allowable load on the nozzle is calculated automatically, and FE/pipe can generate a table of allowable load on any nozzle, including the maximum single value and the maximum load applied at the same time.

The design calculation of the protruding part, the recommended size, the required welding quantity, is independent or needs to be strengthened.

Axisymmetric plane stress and plane strain are used to calculate the surface and bending stress of the section.

Automatic fixed tube and thin-walled tube model analysis, provide overall stress and failure stress of section, calculate and automatically generate the range of various sections according to principal stress and secondary stress (allowable stress according to

ASMEVIII div1APPA, allowable load of pipe according to TEMARCB7.29)

Considering all kinds of fluid elevation, the fluctuation pressure of each concentration is simulated.

Resonance analysis such as acoustic vibration and wind vibration calculation.

Pressure stiffness analysis provides users with pressure effects on SIF and stiffness on nozzles.

The coordinate system of the database allows all model intersections to be in the global coordinate system.

ASIC steel structure library allows users to model angle steel, double-angle steel pipe and T-shaped geometry.

■□■□

+ cooperate in good faith to ensure quality! Long-term validity:

+ electricity. Talk about TEL:18980583122 customer service Q.Q:1140988741

■□■□

Nozzle Pro v5.2 1CD nozzle finite element

NozzlePRO pressure vessel and pipeline professional finite element software is a necessary tool for pressure vessel and pressure pipeline engineers to enhance and replace traditional WRC 107and WRC with the latest and most reliable technology.

297 and Zick saddle calculation method. NozzlePRO is a finite element analysis engineer developed by Tony Paulin (original author of pipeline stress analysis software CAESAR II) for pressure vessels and pipeline engineers.

The primary task is to assist engineers in designing safer and more economical equipment and pipelines so as to improve the design efficiency of engineers.

NozzlePRO is a special finite element analysis software for pressure vessels and pressure pipelines, which can directly check the nozzles on the cylinder, head, cone section and flat cover, as well as saddle.

Check the seat, ear seat and tube shoes. It takes more cost and time to use general finite element analysis software (such as ANSYS), and the whole job can be done in a few seconds with NozzlePRO.

. By entering a few simple graphic parameters, the model can be automatically created, analyzed and checked, and a detailed report can be generated. NozzlePRO also includes 3D solid elements (6 or 18 degrees of freedom) or

The axisymmetric model can include the analysis and verification of pressure, steady-state or transient heat transfer, wind and earthquake-induced overturning moment.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.