Shulou(Shulou.com)06/01 Report--

How to return the Windows 10 card with SSD solid state disk? in view of this problem, this article introduces the corresponding analysis and solution in detail, hoping to help more partners who want to solve this problem to find a more simple and feasible way.

Many partners have encountered the problem of changing solid-state drives. Usually we check whether the AHCI driver, 4K alignment and Jack are connected incorrectly, but few people pay attention to a setting in the operating system. This setting is a hidden feature in Win10 and is also closely related to the operation of solid state drives. What is it? Let's look down together.

1. Click on the search bar and type "powershell" to run Windows Powershell as an administrator

Run Powershell as an administrator

two。 According to your hard disk type, copy the following code to Powershell for execution

1) SATA hard disk

Powercfg-attributes 0012ee47-9041-4b5d-9b77-535fba8b1442 0b2d69d7-a2a1-449c-9680-f91c70521c60-ATTRIB_HIDE

Powercfg-attributes 0012ee47-9041-4b5d-9b77-535fba8b1442 dab60367-53fe-4fbc-825e-521d069d2456-ATTRIB_HIDE

2) M.2 hard disk

Powercfg-attributes 0012ee47-9041-4b5d-9b77-535fba8b1442 d639518a-e56d-4345-8af2-b9f32fb26109-ATTRIB_HIDE

Powercfg-attributes 0012ee47-9041-4b5d-9b77-535fba8b1442 fc95af4d-40e7-4b6d-835a-56d131dbc80e-ATTRIB_HIDE

Paste code directly in Powershell for execution (pay attention to distinguish your own hard disk type)

3. After the execution is finished, directly open the "Settings" → "system" → "power and sleep" → "other power settings", select "change plan settings" → "change advanced power settings", then you will see several new items added to the original hard drive settings, which are also divided into SATA hard drive and M.2 hard drive.

1) SATA hard disk

The picture shows the settings of the SATA hard disk.

Two main settings have been added to the SATA hard drive, namely AHCI Link Power Management-HIPM/DIPM and AHCI Link Power Management-Adaptive. Where "AHCI Link Power Management-HIPM/DIPM" is the mode option for LPM (linked power management, a power-saving mode for SATA), which simply means which energy-saving mode SSD will perform.

Win10 provides a total of five sets of options, namely: Active (always active), HIPM (host-initiated LPM), DIPM (hard disk-initiated LPM), and Lowest (low energy consumption mode). Usually, the stutter of the hard disk is caused by the fact that the hard disk does not match the LPM mode of the operating system (for example, SSD only supports DIPM, but Win10 is set to HIPM). The solution is to change it to "Active" to turn off the energy saving mode.

SATA users recommend the above settings

"AHCI Link Power Management-Adaptive" is the waiting time for LPM to transition from shallow hibernation (Partial) to deep hibernation (Slumber). The lower the value, the higher the frequency of entering deep hibernation (that is, stutter is more obvious). It is recommended to set it to "0 millisecond" to cancel deep energy saving.

2) M.2 hard disk

The settings for M.2 hard drives are slightly different, namely "Primary NVMe Idle Timeout" and "Primary NVMe Power State Transition Latency Tolerance", in which "Primary NVMe Idle Timeout" is similar to "AHCI Link Power Management-Adaptive" in SATA and is also the waiting time before automatically entering energy saving mode. In pursuit of performance, you can set this value to a higher value, such as 600, and to cool down, set this data to a lower value, such as 100.

The picture shows the settings of M.2 hard disk.

"Primary NVMe Power State Transition Latency Tolerance" is the switching delay time of the power mode. The smaller the value, the less stutters (e.g., 10). However, it should be noted that M.2 hard disk is different from SATA, the overall heating is more abnormal, so it is more careful to adjust these two values.

Many people have not noticed the above method. It is actually a power management option in Win10. It should be noted that this set of methods is recommended to try only on computers with obvious stutters in the system, and the M.2 hard drive should pay special attention to the heat.

This is the answer to the question about how to return the Windows 10 card with SSD solid state disk. I hope the above content can be of some help to everyone. If you still have a lot of doubts to be solved, you can follow the industry information channel to learn more about it.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.