Shulou(Shulou.com)06/03 Report--

After installing the Hyper-v role, open Server Management-tools-Hyper-v Manager

1. After opening Hyper-v Manager, select New-Virtual Machine on the right

two。 Select "next"; (but if you read the details, you can click directly here, using the default virtual machine configuration, and the next step is only when you want to customize the configuration, but in general, you need to customize the virtual machine. Of course, you can also use the default first, and then modify the configuration of the virtual machine in the virtual machine settings, but this is not necessary, just use the custom configuration of the virtual machine. )

3. Customize a name for the virtual machine; (look at the black box, the default path of my virtual machine is under disk C, but what if I think the virtual machine on disk C takes up too much space? We can select "store the virtual machine in another location"), and then select "next"

4. "first-generation" virtual machines and "second-generation" virtual machines this is the concept of windows server 2012 R2, in previous versions, only the first generation, but it is important to note that the second-generation virtual machines here install at least windows server 2012 or 64-bit version of windows 8. Here we will choose "the first generation", and the "second generation" will be introduced in detail later. Then select "next step"

5. Here is to allocate memory to the virtual machine, which should be based on the actual situation, taking into account the system and version you installed, as well as your actual memory, my machine does not have much memory, so I only allocate 512MB to the startup memory. If the memory can be divided a little more, and you can check "use dynamic memory for this virtual machine"; (then what is the "boot memory"? Startup memory is the memory allocated to the virtual machine when the virtual machine starts, and this part of the memory is always allocated to the virtual machine. So what is "dynamic memory"? Dynamic memory means that when the virtual machine runs out of start-up memory, it can "borrow" memory from the physical machine. As for how much memory can be "borrowed", it can be set later. When the virtual machine does not need so much memory, she will return the borrowed memory to the physical machine. ) and then select "next"

6. Choose linked networks for virtual machines, there are two newly built virtual machines, one is "unlinked", and the other is your actual network (network adapter for physical machines), so why are there three on my side? Because I built a virtual switch, that LAN is my virtual switch, and the virtual switch will not be discussed here later. ("unlinked" means that virtual machines are not connected to the network, "LAN" refers to independent networks, and "actual network" means that virtual machines and physical machines use the same network. ) and then select "next"

7. Select to create the virtual disk, the name of the disk (use the name of the virtual machine), modify the path of the virtual disk, and select "Browse"

8. Select the save path, and then select Save folder

9. Enter the capacity of the hard disk, and then select "next"; (of course, you can also select the existing disk, select "

10. Here you can select "install the operating system later", "install the operating system from bootable CD/DVD-ROM", "install the operating system from the boot floppy disk" and "install the system from the network-based installation server". Here I choose to install the operating system from a bootable CD/DVD-ROM, but below you can choose whether to install from a physical optical drive or from an ISO image. If you install from a physical optical drive, you just have to put the system disk into the optical drive. What I choose here is the "image file" installation, that is, the ISO image installation. Select "Browse".

11. Find the ISO image of the system you want to install, select and then "Open"

twelve。 Then select "next step"

13. Select "done"; here, the virtual machine is built, and then we can start the virtual machine installation system.

14. Right-click your new virtual machine, select start, and then right-click again to select the connection (of course, you can also choose double-click, that is also the connection. )

15. Of course, if you choose the connection first, we can turn on the virtual machine by "operation"-"start".

16. The virtual machine starts, installs the system, below should not need me to say, installs the system.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.