Shulou(Shulou.com)06/03 Report--

Brief introduction

As shown in the topology diagram above, static routes, default routes, and rip and ospf in dynamic routes are used in this lab, and the ports and areas are also clearly marked.

Configuration proc

R2, pay attention to configure the default route out

R1, which is the same as the 192.168.10.0 network segment, needs to configure a static route and inject 10 and 20 network segments into the osfp protocol

R3, connecting the 12.0.0.0 network segment of the public network, you need to configure the default route out, and also inject the default route into the protocol.

R4, as well as rip protocol and ospf protocol, note the mutual injection of the two protocols

R5, configure static route out

R6, in the rip protocol

Configuration address of four PCs

Test whether it is interoperable

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.