Network Security Internet Technology Development Database Servers Mobile Phone Android Software Apple Software Computer Software News IT Information

In addition to Weibo, there is also WeChat

Please pay attention

WeChat public account

Shulou

How to solve the problem of shutdown and restart

2025-04-04 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >

Share

Shulou(Shulou.com)06/01 Report--

This article introduces the relevant knowledge of "how to solve the problem of shutdown and resurgence". In the operation of actual cases, many people will encounter such a dilemma, so let the editor lead you to learn how to deal with these situations. I hope you can read it carefully and be able to achieve something!

Solution 1: modify the registry

[HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Window NT\ Currentversion\ Winlgon] then create or modify an existing string value named "PowerdownAfterShutdown", with a value of "1" to power off the computer at shutdown, and 0 to restart.

Exit Registry Editor and restart windows for the changes to take effect.

Reason 2: senior power management is in trouble.

As we all know, shutdown is closely related to power management, and the cause of shutdown failure is likely to be the poor support of power management to the system.

Solution 2: click "start → to set → control panel → performance and maintain → power options", in the pop-up window, enable or cancel "Advanced Power support" as needed. If you use Advanced Power support when a failure occurs, try to cancel it. If you use Advanced Power support when a failure occurs, try to enable it, and the fault will often be solved.

Reason 3: the system setting is causing chaos.

Windows XP restarts automatically when there is an error in the system by default, so that when the user shuts down, the computer will be restarted if there is an error during the shutdown. Turning off this function can often solve the problem of automatic restart.

Solution 3: right-click "my computer" on the desktop, select "Properties" in the pop-up right-click menu, pop-up "system Properties" window, click the "Advanced" tab, click the "Settings" button in the "Startup and Fault recovery" column, and pop up the "Startup and Fault recovery" window, as shown in figure 1. In the "system failure" column, uncheck the "automatic restart" option and click the "OK" button.

Reason 4: virus destruction (needless to say, everyone knows about this solution)

Reason 5: wrong BIOS setting

May have mistakenly modified the options for power management in BIOS. If you are familiar with the BIOS settings, please enter BIOS and try to modify the options for power management in BIOS. If you are not familiar with BIOS, simply select the "Load default setup" option and restore BIOS to its factory default settings. The most common cause of automatic restart after computer shutdown is caused by fast shutdown.

Solution 5:

① start\ run\ input: msconfig\ OK\ system Utility configuration\ Advanced\ check "disable Quick shutdown"\ restart your computer.

If ② is not resolved, see if there is a driver or hardware error.

The brain restarts automatically when it shuts down normally, usually due to problems with the power management of the motherboard. Due to the influence of wiring design and part quality, the response of some motherboard power management components to the level signal is not very accurate. Because an instantaneous high voltage will be produced at the moment when the power is cut off on the motherboard, this high voltage exists for a short time and has little damage to the hardware, but it usually makes PCI devices such as network cards and modems produce a tiny pulse. If it is not determined as a noise signal, and the automatic wake-up function is turned on in your motherboard BIOS, the motherboard will detect the external connection request of the network card and other devices, so it will power on automatically. This reason is caused by the hardware, so simply refreshing the motherboard BIOS will not solve the problem. You can try turning off the automatic wake-up function in the motherboard BIOS, or in power management setup\ wake-up by pci card\ disabled (turn off the PCI card wake-up function).

This is the end of the content of "how to solve the problem of shutdown and restart". Thank you for your reading. If you want to know more about the industry, you can follow the website, the editor will output more high-quality practical articles for you!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.

Views: 0

*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.

Share To

Servers

Wechat

© 2024 shulou.com SLNews company. All rights reserved.

12
Report