Shulou(Shulou.com)05/31 Report--

This article mainly introduces how to install the ibm server system, which is very detailed and has a certain reference value. Interested friends must finish reading it!

First, we need to prepare two USB drives larger than 4G, one to burn the official boot image of IBM and the other to burn the image of the 2008 system, and then we need to download a floppy disk (UItralISO) software on the computer.

1. Open the UItralISO software and insert the USB disk. In the upper right corner of the software, select the file-open-select the official IBM boot image we downloaded.

2. After opening the image, the UItralISO software will read some system files in the image.

3. At this time, we select the boot (B) option of the toolbar, and there is a "write to hard disk image" click to open.

Select your USB disk in the hard drive column, and after selecting the USB disk, we change the write mode to USB HDD+ to write a new hard disk master record during convenient startup-choose USB HDD+ (PS: U disk must be formatted) to write directly after formatting, wait a moment, the mirror write is complete. This is a tutorial that uses a flash drive as an image. For this installation, you also need to download a system image of WIN2008. For specific steps, please refer to the above steps.

Our bootstrap program and system have been burned to a flash drive in the above way, and then we can take the flash drive to find the server that needs to be installed.

1. We insert the USB flash drive into the computer, and there will be a post program IBM System X after booting.

2. When this place pops up, we press F1 to enter the motherboard settings, and select BOOT Manager to enter.

3. After entering, all the options are gray, then press the enter key, then use the up and down keys to select the option of USB, then press and hold the shift plus + key to set it to the first place, then press the enter key, the interface becomes gray again, then we have to press the up and down keys to the last column, press enter, even if saved, and then go back to the upper level to set up the interface, that is, this interface Select Save Settings (Save Settings)

4. Press ESC to exit, there will be a prompt point Y key to exit. At this time, the server restart will go directly to your flash drive boot system. The following picture is the SeverGuide boot program. We just need to wait patiently.

5. After loading, select English to enter the interface below

6. Select United States and click NEXT to go to the next option interface, change the English above to Chinese, select the I accept below, and click NEXT.

7. Click NEXT directly on the Welcome page.

8. Then choose the server to install the system. Select windows sever 2008R2 64-bit here, and then click NEXT.

9. The next step is to set the date and time. Generally, the server can directly recognize the time at that time. Click NEXT after setting it up.

10. The next step is to set up the server array. If the new server has not been arrayed, you can choose to set the array you want in this step. If you are a friend who reinstalls the system, select the Keep line directly, and then click NEXT.

11. If you are a friend with a new array at this step, you will have to wait for a while, and then select NEXT.

12. This step is to partition the system disk, that is, the size of disk C, and the editor chooses 500G, which is set according to your personal needs; select NTFS format, and then click NEXT. (note: Clear Disk is a friend who removes all data from the hard disk.

13. Then the bootstrap program will display some information about your server. If you have a friend who has a CD, just insert the CD and click NEXT directly. If you choose a friend who installs the system on a U disk, select Exit directly in this step.

(friends of the CD-ROM installation system will end the tutorial at this step, the server will restart and automatically enter the CD-ROM to start the installation system. After the friends of the USB disk choose to exit at this step, the server will restart. At this time, unplug your boot USB disk and plug in the previously made system image USB disk. At this time, the server still starts from the USB disk by default. After successfully booting the server from the USB disk, the server also enters the interface of installing the system.)

The above is all the contents of the article "how to install the ibm server system". Thank you for reading! Hope to share the content to help you, more related knowledge, welcome to follow the industry information channel!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.