Shulou(Shulou.com)06/01 Report--

This article will explain in detail how to solve the problem of Windows computer boot black screen only with cursor flashing. The quality of the article content is high, so Xiaobian shares it with you as a reference. I hope you have a certain understanding of relevant knowledge after reading this article.

The computer turned black and there was only one cursor flashing, no matter how many hours you waited until you crashed. Have you ever experienced such a situation? I think many people who like to toss around on computers will encounter it, but the solution is different. Some reinstall, some disassemble and reconnect, some even suspect that it is a hard disk problem and directly replace a hard disk. Now let me talk about some solutions to this problem.

method/step

When your computer appears after such a situation, do not blindly operate because of anxiety, because your blind operation, it is possible to make the system completely crash, there is no room for recovery. So, first of all, think calmly about whether you have done anything before, or what website you have visited. Because this situation is likely to be caused by viruses, viruses delete your system partition table or system startup files, there may be such problems.

We first have to restart it, in the boot time keep pressing the F8 key, if keep pressing after a black white menu, then fortunately, that your system is not a problem. We enter the security mode of the system, enter the antivirus, and repair the missing system files. Then restart the machine, and perhaps the problem will be solved smoothly.

If you keep pressing F8 and nothing happens, the problem with your computer is serious. If your system had a backup, there might be a chance. Restart again, keep pressing the up and down keys of the keyboard before booting. If a menu of system selection appears, the problem is still not big. It is only a system problem, not a hardware problem. Select Enter Restore Program to perform a system restore. After restoration, of course, you can start smoothly.

If no matter what key you press, you can't wake up the black blinking icon, it means the problem is very serious. At this step, it cannot be concluded that it is a hardware problem, and it may be solved through software operation. You may need to use the PE system. Restart, enter BIOS, select USB drive to boot, enter PE system. After entering, fix the system problem again, or disinfect, or repair. Repair complete, reboot, problem may be solved.

If you enter the pe system, but also the system for recovery operations, even in the pe reinstalled the system, but after the boot is still like this, this time you have to be mentally prepared. Because it could be hardware. But at this point, it is not necessary to send for repair. You can disassemble the chassis, remove the hard disk cable, memory, graphics card, cpu, etc., wipe it down, and then install it. Be careful not to disassemble the machine violently because of anxiety, because if a certain hardware is damaged, there is no way. This kind of operation is relatively risky, but trying it may solve the problem. If this is the case, then after you re-install, and then boot the problem may be solved.

precautions

Dismantling is risky and careful. If you are not familiar with the computer hardware, or never touched, it is best not to open the case, and if your computer is a brand machine, and there is no shelf life, it is best not to open it, so as not to cause unnecessary losses.

About windows computer boot black screen only cursor in flash how to solve the problem to share here, I hope the above content can have some help for everyone, you can learn more knowledge. If you think the article is good, you can share it so that more people can see it.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.