Shulou(Shulou.com)06/02 Report--

The purpose of this article is to share with you the solution to not displaying solid state drives in pe. The editor thought it was very practical, so I shared it with you as a reference. Let's follow the editor and have a look.

The reason why the solid state drive is not displayed in pe is that the version of PE used does not support the AHCI mode reading of the hard disk. The solution is to download the latest version of PE and then install it to the USB drive.

It is recommended to enter BIOS to see if the hard drive is detected. If not, the hard drive needs to be replaced. If so, change the SATA hard drive controller mode to IDE, or use win8 PE to recognize the hard drive.

What should I do if I can't find the hard disk after entering the PE system?

The main reason for not finding the hard disk after entering the PE system is that the hard disk uses AHCI mode, while the older version of PE used does not support reading the AHCI mode of the hard disk, so you only need to download the latest version of PE, and then install it to the U disk, which can generally be solved. After entering the PE system, you can normally view the contents of each partition of the hard disk. Or you can go to BIOS and go to Advanced to change the interface mode of your hard drive, SATA, and change AHCI to IDE. After entering PE, you can see your various hard disk partitions. After using PE to restore the system, don't forget to change it back.

Second, the solution: since the hard disk mode is not compatible, we have to prescribe the right remedy to the case and modify the hard disk mode by setting bios.

1. Restart the computer and press the corresponding shortcut key to enter the bios setting interface when the boot screen appears. Generally speaking, the shortcut key to enter the bios settings interface is one of del, F2 or F1, which users can try one by one. After entering the interface, through the left and right arrow keys on the keyboard to switch to the "Advanced menu", and then move the cursor through the up and down arrow keys to select "SATA Configuration".

2, then press the enter key to open the SATA Mode Section window, you can see IDE and AHCI two options, here, we select the IDE option, and press the enter key to confirm, and finally press the F10 key to save the modified settings.

3. After performing the above operations, when we enter the pe system again, we can see the computer hard disk.

Thank you for reading! So much for the solution of not displaying solid state drives in pe. I hope the above content can help you to some extent, so that you can learn more knowledge. If you think the article is good, you can share it and let more people see it.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.