Shulou(Shulou.com)06/03 Report--

The company has a large number of computer brands and models, and there are still a number of solid-state and mechanical double disks. in order to solve the problem of dual hard drives automatically choosing solid-state hard drives to install, I have checked the information for nearly half a month, various forums and technical websites at home and abroad. Specific configuration methods in this area have not been found.

I thought that since you can obtain the SN, you should also be able to obtain the machine model. Selecting the location of the hard disk according to the model should be a breakthrough, and then start to check the official documents. There are several parameters in the dynamic variables:

_ SMSTSMake this is the computer manufacturer _ SMSTSModel this is the computer model

With these two parameters, the task sequence can be selected automatically, and when partitioning, the machine model is automatically determined and then partitioned.

For example:

We have Dell 3400, of course, this is the abbreviation: Dell Latitude 3400, this is double disk, disk 0 is HDD (500GB), disk 1 is SSD (128GB), then we can first add partition, BIOS or UEFI, I use UEFI to copy the default UEFI partition to modify:

Add a variable _ SMSRSModel = Latitude 3400. This is a specific model number is 3400 before you can use this sequence.

Then HDD will have another sequence, and I will share a disk on my side.

Two variables are retained here, and the other variables are deleted. In Bios, modify _ SMSTSBootUEFI to be not equal to true.

When a problem is found during the test, SCCM will by default assign the C letter to the first available disk of disk 0, and the sequence variables need to be modified.

Then add this variable to the system installation step.

Basically, this is done, but for fear of problems, I added an additional task sequence after formatting the disk partition:

Due to limited resources, it has not been tested whether this item can be used after it is cancelled.

The sequence of the double disk has been added, what about the single disk? Single disk is easy to say, the same number of paths, there is only one disk 0, because the installation of the operating system that step added variables, so the sequence of single disk also need to specify a variable.

You can't skip this step, or you'll make a mistake.

Dell is better, the model is basically the same, Lenovo is embarrassed, L480 is the model, but the model in Bios is: 20LTA82HCD, so read it carefully.

This is the configuration in which _ SMSTSModel equals. If there are many models in a series, such as Dell 3400 Latitude 3490, both of them are similar, then it is not appropriate to use "like" 3490.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.