Shulou(Shulou.com)06/02 Report--

Default password for 14g server iDRAC9

IDRAC9 uses a new UI management interface and uses Secure Password technology. The default management IP for iDRAC9 is dynamically assigned to DHCP, and all supported systems come with a unique iDRAC default password at random, unless you choose to set calvin as the password when ordering the system. The factory default security password is located at the bottom of the server Service Tag tag card, and if the iDRAC default password is empty, the default password is calvin.

Introduction of iDRAC remote Control Card

The iDrac card is equivalent to a small computer attached to the server, which communicates with the management chip BMC on the server motherboard to monitor and manage the hardware status information of the server. It has its own OS and IP addresses, regardless of the OS on the server. There are two versions of iDRAC: Express (free) and Enterprise (paid).

1. Set the IP address of IDRAC9 through BIOS

1.1. Power on, follow the prompts to enter the management interface

1.2. Select

1.3. Select

After confirming that it is Enable, select or LOM1~LOM4 (shared Server Ports 1-4) and connect the network cable correctly. The Dedicated (dedicated network port) connection method is recommended in IDRAC Enterprise version.

1.4. Select

Enable IPv4= Enabled

Enable DHCP = Disabled

After returning to the interface, go to set the user name and password to access the iDRAC.

The default user name is root, the default password (non-custom model) is on the back of the service tag card, and the user name and password can be changed in the and column. After setting the user name and password, click BACK to return.

Click Finish to restart the server.

2.WEB login, configuring RAID

2.1. Properly connect the client, such as a laptop, to the iDRAC management port of the server and set the IP address of the client correctly. Enter the IP address of iDRAC in the browser to log in to the IDRAC management interface

2.2. Select-from the menu bar

2.3. In the create virtual disk interface, select the parameters according to the actual situation or default, select the physical disk, and click

2.4. Return to the storage configuration interface and select to start the operation.

2.5. You can see the execution in -.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.