In addition to Weibo, there is also WeChat
Please pay attention
WeChat public account
Shulou
2025-02-24 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >
Share
Shulou(Shulou.com)06/02 Report--
Problem phenomenon: the system is open, press' F2' can not enter the BIOS, directly enter the system, in fact, press F2 on the virtual machine can enter the BIOS, how should this be solved?
Reason analysis: because the time of clicking F2 to enter BIOS is too short, very often users can not enter BIOS because they do not have time to press F2.
Solution:
Method 1: one-time method (the same operation is required for the next use), and the boot automatically enters the BIOS.
1. Close the virtual machine, find the storage directory of the virtual machine system (note: it is not the installation directory of the software of the virtual machine), and then go to the folder of the corresponding system. (for example: for WIN7 system, find the folder of win7, open a .vmx file with notepad (here is TestOS.vmx), and add the line bios.forceSetupOnce = "TRUE" at the end, as shown below)
Bios.forceSetupOnce = "TRUE"
Note: after booting, BIOS will be entered automatically, but after VMware is started, this parameter will be changed from 'TRUE' to' FALSE',. If you need to continue to use BIOS, you need to manually change it to 'TRUE'.
Method 2: the method of entering BIOS many times or often to prolong the time of startup screen.
1. Close the virtual machine, find the storage directory of the virtual machine system (note: it is not the installation directory of the software of the virtual machine), and then go to the folder of the corresponding system. (for example: in the case of a WIN7 system, find the folder of win7, open a .vmx file with notepad (here is TestOS.vmx), and add the line bios.bootDelay = "5000" at the end, where 5000 means 5 seconds. The following figure)
Bios.bootDelay = "5000"
Summary
The above is the solution that the editor introduced to you that the Vmware virtual machine can not enter the BIOS screen by pressing F2. I hope it will be helpful to you. If you have any questions, please leave me a message and the editor will reply to you in time. Thank you very much for your support to the website!
Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.
Views: 0
*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.
Continue with the installation of the previous hadoop.First, install zookooper1. Decompress zookoope
"Every 5-10 years, there's a rare product, a really special, very unusual product that's the most un
© 2024 shulou.com SLNews company. All rights reserved.