Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, cool 9976a evaluation, cool 9976a many people do not know, now let's take a look!

1. Introduction: now our mobile phones have large screens, upgrading from the previous small Nokia screen to the current 4.0 screen. And 4.0 screen is small, large screen has both advantages and disadvantages. There are many advantages, and all kinds of movie games are easy to operate. But the only disadvantage of the big screen is that it is easy to break. What if the screen of Coolpad 9976a is broken? Next, let Benshaw tell you that you don't have to be afraid to break it. Buy your own screen and change it yourself!

2. The price of the screen

3. It is known that the price of the official screen is 1100, while the screen sold online is about 600, but the price of this phone is only 1888, which is really not cost-effective if you go to the official exchange. Then if you want to change it, buy a screen online and change it yourself. Bian Xiao also changed his mobile phone, which is an all-in-one machine with no screws in the shell. Bian Shaw's mobile phone has been dismantled many times by Bian Xiao. Don't worry about stalking Binshaw. The same is true of an all-in-one machine.

4. Untie

5. The way of disassembling the all-in-one machine is a little violent. First, open the back cover. Use a hairdryer and sucker. Blow off the soft glue on the back cover with a hairdryer. It will take about a few minutes. Press the sucker on the back cover and carefully pull out the entire back cover. Then we can see a battery and use a screwdriver to unscrew all the screws. Gently buckle the motherboard cover on the back with tweezers, and then we can see what is shown in the picture above. There are two wires, and both of them are upward. it is a simple cable buckle type, including the camera can also be removed. It's basically like this in all-in-one machines. After gently unplugging, you will disconnect all power connections to the screen and motherboard. Other things removed should be put in the box, small parts are easy to lose.

6. Change the screen

7. The above picture is a very important one worthy of attention. Remove the SIM card holder before tilting the motherboard, otherwise it will get stuck. When the motherboard is tilted upward, the battery can also be removed. At this point, the battery, motherboard and screen panel are removed. The next thing is simple.

8. As shown in the picture, if everyone's screen is broken, you can disassemble it like this, then buy a screen online and install it directly. It is worth noting that if you buy the screen online, he will send you back cover glue, screwdriver, plastic tweezers and so on. With these tools, you can easily change the screen. After changing the screen, we will install it as carefully as when we remove the screen. There is also a noteworthy problem here, that is, the motherboard protection cover has a signal antenna, speaker function and vibration device, so the protection cover should be carefully installed.

9. Conclusion: after listening to Bian Xiao's introduction, do you think it is very simple? Yes, the all-in-one machine is disassembled in the same way. But when you install it, you must carefully fasten the cable or something. Pay attention to the position of Cato and follow the above method. When you cover the back cover, you just need to remove the glue and paste it yourself. It is best to repeat it just right, because some will cover the signal antenna on the motherboard when the glue is wide. Changing the screen is actually very simple. Did you learn it?

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.