Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, how to dredge the blockage of the washing machine drain, many people do not know, now let's take a look!

With the development of science and technology, people's economic level has generally improved. People's quality of life has also been greatly improved, such as the popularity of household appliances. Especially in recent years, with the encouragement of the policy of "home appliances going to the countryside", the promotion of household appliances has reached the largest in history. Almost every household has washing machines and other household appliances, but the promotion of washing machines also brings some problems. Don't go into too many details. The following is a detailed description of how to replace the drain pipe of the washing machine.

Type, automatic washing machine

Change the direction of the drainage pipe (according to the actual installation needs)

1. Place the washing machine face down, pay attention to protection, remove the screws that secure the floor with a screwdriver, and remove the bottom plate.

two。 Remove the screws on the drain retaining clip and the base hole plug respectively, remove the screws on the retaining clip and the hole plug, and then pull out the drain pipe

3. Press the drainage pipe into the groove on one side of the drainage direction, secure it with a fixing clip, and then install the bottom hole plug on the other side of the drainage pipe.

4. Install the backplane and lift the washing machine.

For washing machine models with drains, the direction of the drain is slightly different, as follows:

1. Remove the backplane in the same way as before

two。 Remove the retaining screw of the drain, then push the drain in and pull the inner drain from the inside of the washing machine.

3. Remove the drainage cover opposite the drain, install it on one side of the original drain, then insert the drain into the side of the removal cover and secure the drain with screws.

4. Install the backplane and lift the washing machine.

Washing machine drain: installation of

1. Aim the drain pipe at the outlet of the washing machine and push it to the bottom of the outlet.

two。 If possible, the interface card can be fastened with a snap spring or sealing belt to prevent water leakage.

Washing machine drainage pipe finishing:

1. The installation height of the drainage pipe from the ground should be less than 10cm and should not be wound.

two。 If the drain pipe is too long, the drain pipe can be cut short. For smooth drainage, pay attention to oblique cutting when cutting the drainage pipe.

3. When the drainage pipe needs to be lengthened, the diameter of the lengthened pipe should match the diameter of the drain pipe, but the length should not be more than 1.5m.

After installation, you need to ask professionals to test regularly to ensure normal operation.

The second category. Drum washing machine

The installation height of the drainage pipe of the washing machine should not be lower than that of 60cm, so as to avoid poor water intake and drainage. In addition, the head of the washing machine drain pipe can not be closed with sewage, which is easy to cause siphon phenomenon and poor water intake and drainage.

Installation method:

You can clip the drainage pipe to the plastic card at the back of the washing machine. If the length after installation is not enough, it can only be solved by lengthening the length of the pipe. For unfinished matters, please strictly follow the instructions. In addition, there is usually a special door staff to guide you during the initial installation and commissioning. If the drainage pipe needs to be replaced and installed in the future, it is recommended that you call the after-sales service number and let the after-sales staff come to serve you!

In the above article, we described in detail how to change the information about the washing machine drain. Through the above, we can roughly understand the reversing mode of the washing machine drain pipe and the reversing mode of the washing machine drain pipe because in daily life, the purchase of household appliances is always after the house decoration, so there may inevitably be some gaps in the direction of drainage, so it is common to change the direction of the washing machine drain pipe. After all, the house can't be redecorated. Of course, the promotion of washing machines is mainly the support of government policies and the development of the people's economy.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.