In addition to Weibo, there is also WeChat
Please pay attention
WeChat public account
Shulou
2025-04-05 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Development >
Share
Shulou(Shulou.com)06/01 Report--
This article mainly introduces the relevant knowledge of "how to use Psensor to monitor the hardware temperature of the system". The editor shows you the operation process through the actual case. The operation method is simple, fast and practical. I hope this article "how to use Psensor to monitor the hardware temperature of the system" can help you solve the problem.
Psensor is a GTK +-based tool for monitoring system hardware temperature and drawing real-time charts from the obtained data for quick review in Linux.
With Psensor, you can:
Monitoring cpu and motherboard temperature monitoring NVidia GPU documents monitoring hard disk temperature monitoring fan speed monitoring CPU utilization
The latest version of Psensor also provides Mini Program instructions in Ubuntu, which makes it easier to monitor the temperature in Ubuntu. You can choose to display the temperature in the upper right corner of the panel. It will also be notified after the temperature has passed the threshold.
How to install Psensor in Ubuntu 15.04,14.04
Before installing Psensor, you need to install and configure lm-sensors, a command-line tool for hardware monitoring. If you want to measure the disk temperature, you also need to install hddtemp. To install these tools, run the following commands:
Sudo apt-get install lm-sensors hddtemp
Then begin to detect the hardware sensor:
Sudo sensors-detect
To make sure it is working, run the following command:
Sensors
It gives the following output:
Acpitz-virtual-0Adapter: Virtual devicetemp1: + 43.0C (crit = + 98.0C) coretemp-isa-0000Adapter: ISA adapterPhysical id 0: + 44.0C (high = + 100.0 °C, crit = + 100.0 °C) Core 0: + 41.0° C (high = + 100.0 °C, crit = + 100.0 °C) Core 1: + 40.0° C (high = + 100.0 °C, crit = + 100.0 °C)
If everything looks all right, install Psensor using the following command:
Sudo apt-get install psensor
After the installation is complete, run the program in Unity Dash. The first time you run it, you should configure what status Psensor should monitor.
Display temperature on the panel
If you want to display the temperature in the panel, go to Sensor Preferences:
Under the Application Indicator menu, select the component for which you want to display the temperature and check the Display sensor in the label option.
Start Psensor every time you start
Go to Preferences- > Startup and select Launch on session startup to start Psensor each time you start.
This is the end of the content about "how to use Psensor to monitor the hardware temperature of the system". Thank you for your reading. If you want to know more about the industry, you can follow the industry information channel. The editor will update different knowledge points for you every day.
Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.
Views: 0
*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.
Continue with the installation of the previous hadoop.First, install zookooper1. Decompress zookoope
"Every 5-10 years, there's a rare product, a really special, very unusual product that's the most un
© 2024 shulou.com SLNews company. All rights reserved.