Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, how the router speed limit is the best, how the router speed limit many people do not know, now let's take a look!

At present, with the popularity of wireless Internet and the wifi demand of intelligent Internet equipment, the phenomenon of building local area network through wireless router is more and more. Wireless routers can not only provide wireless Internet access for mobile phones and tablets, but also avoid the trouble of network wiring, and can achieve a speed comparable to that of wired Internet access. Therefore, accessing the Internet through wireless routers is becoming more and more popular in enterprises and institutions.

However, although networking is convenient through wireless routers, external computers can access the local area network at any time because of the need to dynamically assign IP addresses to computers, so it is impossible to bind IP and MAC addresses. In particular, it is common for employees to use mobile phones and tablet Internet access privately, which is usually unrelated to work. On the one hand, it takes up employees' working time; on the other hand, employees often use mobile phones and tablets to download materials and watch videos online, which also takes up the company's network bandwidth resources, which can easily lead to the slow speed of the local area network and the decline of network performance.

So, how to limit the speed of wireless router and what is the speed limit setting method of wireless router?

The steps of the graphical tutorial for setting the router speed limit are as follows:

1. The speed control and traffic monitoring of the local area network are realized through the functions of the router itself.

1. First, log in to the router management interface. The login address of a general router is 192.168.1.1 or 192.168.0.1. You might as well give it a try, or just look at the label on the outer shell of the router. First, we open a browser, enter the login address of the router, and then fill in the user name and password (the default is admin, if not, please refer to the label on the router shell.

Log in to the router management interface

two。 As shown in the figure above, after entering the login user name and password of the router, we can click OK below to enter the router settings center. If your router supports speed limit, we will see a "IP broadband control" on the left, as shown in the following figure:

IP Broadband Control function of Router

3. As shown in the figure above, we can click "IP Broadband Control" to enter the router speed limit setting, as shown in the following figure:

Router limit setting surfac

Description of IP bandwidth control parameters for router speed limit setting:

1. The conversion relationship of bandwidth is: 1Mbps=1000Kbps

two。 When selecting the type of broadband line and filling in the bandwidth, please select and fill in according to the actual situation. If you are not clear, please consult your bandwidth provider (such as Telecom, Netcom, etc.)

3. After modifying the following configuration items, click the Save button to make the configuration items effective.

4. If the IP bandwidth control rule for the enabled state is not set, the bandwidth size you fill in will not work.

Here, the router speed limit setting mainly pays attention to a few points. First of all, you need to know how many meters of network cable you are pulling, 1 meter is about 1000K K, and then you need to set up the broadband of the IP segment. The following author demonstrates that you are using a 4-meter Unicom network and want to set the minimum network speed to no less than 2 meters and the highest to no more than 2 meters. In other words, in your own network, you have to set 2 meters exclusively for use, and other users can guarantee a network of at least 1 meter and a maximum of no more than 2 meters. Specifically.

The setting of router speed limit and the setting of LAN speed controlled by router.

As shown in the figure above, we must pay attention to the above four steps when setting the speed limit of the router. The first step is to check "enable IP Broadband Control", and then the second step is to select your broadband situation. The above demonstration is the 4m network pulled by my family. Then, the setting of the underlying local IP address limits the network situation. The above picture shows that the author intends to design his computer IP address as 192.168.1.2, the network allocation is the lowest 2m, the highest no more than 2m, to other users. 192.168.1.3-192.168.1.255 users have a minimum guarantee of 1m and a minimum of 2m.

Finally, we only need to set the IP address of our computer to 192.168.1.2, and we can set the speed limit conditions for different users according to our own situation, mainly to set the minimum broadband and maximum broadband resource conditions; the internal can be set flexibly.

Second, through the dedicated local area network flow control software L

Although the router can limit the speed of the local area network and allocate bandwidth, the operation of the router is relatively complex, and the function of limiting the speed of the computer is mechanical. So you can also use some special local area network speed control software and network traffic limit software to achieve. At present, there are many special LAN speed control software and Internet traffic limit software in China, which can achieve a certain LAN speed limit. For example, with an "converged network management" software, you only need to deploy a computer in the LAN to control the network speed and bandwidth of the entire LAN computer, and limit the uplink bandwidth and downstream bandwidth of the computer, respectively, as shown in the following figure:

Figure: limit LAN computer bandwidth and control computer network speed and traffic.

In addition, a very important reason for the slow speed of the local area network is that someone downloads P2P, watches P2P network TV and watches video online. Therefore, through Jusheng network management software, you can also restrict P2P downloads, prohibit watching network TV, block video websites, and so on. In order to prevent this non-work-related online behavior from preempting the speed of the local area network. As shown in the following figure:

Picture: prevent P2P downloads from grabbing network speed, and prohibit P2P uploads

In short, local area network speed control and bandwidth traffic restrictions can be achieved through routers, dedicated local area network speed control software, and software that limits the speed of others. However, compared with the router, the LAN speed control software is more flexible in controlling the LAN speed, and the LAN bandwidth flow control can be realized more thoroughly through the effective restriction of P2P software. Enterprises and institutions can make choices according to their own needs.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.