Shulou(Shulou.com)06/01 Report--

The intelligent network of Zero Dun video is mainly composed of Zero Dun Edge device, Zero Dun Control Cloud and Zero Dun acceleration Cloud.

At a glance of the network, the back-end mainly accesses the front-end surveillance camera.

The following is the commercial version and the enterprise version of Edge, with different scenarios and different performance, mainly reflected in the number of machines. Can the commercial version have no more than 4 surveillance cameras, and the enterprise version can bring up to 10 cameras?

Come down for networking operation, connect the equipment to the network, after the equipment is powered on, the Wang port can be connected to the superior router or optical cat.

Enter the Zero user Management system: http://www.easynet.vip, register a personal account for network management, bind the device after login, and the device SN is found on the device shell.

Setup Pha

First set up and select full LAN mode

The back-end device manually sets the working mode to WAN mode

Zero Edge has been set up, and the normal Edge has been networked in different places, but the NVR hard disk video recorder still doesn't know how to find the peer camera through Zero Edge.

Enter NVR, the following is mainly explained by Haikangwei TV.

Turn off the automatic acquisition of IPV4 address. Enter the WAN port IP of Edge in the gateway location of IPV4. If you don't know the WAN port IP of Edge, you can go to these two places to find and manage the system.

Or get into the router.

Implement NVR access to front-end camera

Comparable to the dedicated line of Zidun intelligent video network, is built in this way, this operation is not very simple.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.