Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, the rising sun 410m how to connect the network, the rising sun 410m many people do not know, now let's take a look!

The main contents are as follows: 1. The overall fuselage of Lenovo rising Sun 410m is relatively thick and complicated to disassemble. Many people who have bought the Lenovo rising Sun 410m want to take it apart, understand some of its internal parts, clean it and make the computer run faster. However, due to the trouble of disassembly, users without specialized doors dare not do it. Today, the rising sun 410m side Shaw will show you how to disassemble Lenovo, get a screwdriver ready, and learn the disassembly steps from Bian Shaw.

2. First of all, the removal of the keyboard:

3. Of course, the first step in dismantling the machine is to remove the battery, and then we can remove the bar cover and keyboard above the keyboard. The long cover above the rising sun 410m keyboard is not fixed with screws, but is completely locked with buckles. Gently tilt the edge and slowly pull out the buckle one by one. Please note that the lid needs to be pushed slightly to the left before removing it. In addition, ultra-thin machines are generally fastened with screws, but for larger machines, it is not necessary, because the machine has enough space to allow internal reinforcement. Not if it's ultra-thin. It needs to be fixed with screws directly from the bottom, which can also reduce the use of screws, thus reducing the quality.

4. After taking off the lid, you can easily remove the keyboard. There are clasps on and off the keyboard and two screws are fixed. After unscrewing, gently push toward the screen, and the clasp at the bottom of the keyboard will come out. Then, disconnect the interface between the keyboard and the motherboard and remove the keyboard.

5. After removing the screw, you can remove the button, the wireless network card slot and the protective plate above the CPU.

6. there are screws on the left and right sides of the rear of the fuselage. When they are removed, the entire screen can be removed. As you can see, the screen is fixed by two cylindrical metal rods inserted into the fuselage.

7. The following is the disassembly of the screen.

8. At this time, it should be noted that the data cable of the monitor and the data cable of the wireless network card are still in the fuselage, so it is necessary to remove the screws that fix the data cable of the monitor and pull out the interface. After carefully removing the data cable from the slot, the entire display can be removed.

9. Now that the monitor has been removed, let's see what's in the monitor. First, remove the screws at the four corners of the display screen (with a protective piece on it). After removing the screw, the protective frame around the screen is only fixed by clasp, so you must be careful when removing it. Metal strips with rotating shafts on both sides of the screen are fixed on the back panel of the screen, with four screws on each side. After unscrewing them, the core of the entire display screen is removed.

10. Remove the LCD screen and there is a thin layer of aluminum on the back cover. As the shell of the LCD panel uses general engineering plastic PC ABS, the structural strength is weak, and it does not have the ability to conduct electricity, so it is necessary to use a thin layer of aluminum as a conductive medium to prevent EMI, so as to perfectly protect the LCD body.

Disassemble the internal structure of the notebook.

12. The next step is to disassemble the body of the notebook. As you can see, the heat pipe and cooling fan of the switch key block the aluminum plate under the keyboard area, so you have to remove it first so that the palmrest can be easily removed.

13. After removing the palmrest, you can see the internal structure of Lenovo rising Sun 410m, and we can see that the location of its internal hardware is quite reasonable. Although each hardware is large, it does not affect the overall layout. After studying the internal structure of Lenovo Sunrise 410m, you can clean up the dust on the removed cooling fan, which makes it run more efficiently. After all the work is completed, the parts can be installed back to the original position in turn and return to normal use.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.