Shulou(Shulou.com)06/02 Report--

This article will explain in detail about the use of linux mtr command network diagnosis, the editor thinks it is very practical, so share it with you as a reference, I hope you can get something after reading this article.

Mtr combines the functions of traceroute and ping programs in a single network diagnostic tool. When mtr starts, it investigates the network connection running between the host mtr and the hostname.

By sending purposeful low-TTL packets. It continues to send packets at a lower TTL, recording intermediate routers. This allows MTR to print the response percentage and response time of Internet routes. To the hostname. Packet loss or a sudden increase in response time is usually a sign of bad (or just excessive). Loaded) link. The results are usually reported in round-trip response time (milliseconds) and percentage of packet loss.

Syntax format: mtr [parameters]

Common parameters:

-r reported mode shows how many packets are sent by-c-n does not need to be interpreted by the host-report results are displayed, but not dynamically displayed-s is used to specify the size of ping packets

Reference example

Use the-r parameter to display the report:

[root@linuxcool] # mtr-r 202.108.33.94

Use the-c parameter to set the number of packets sent per second:

[root@linuxcool] # mtr-r-c 30 202.108.33.94

Use the-s parameter to specify the size of the ping packet:

[root@linuxcool] # mtr-r-c 30-s 1024 202.108.33.94 about the use of linux mtr command network diagnosis is shared here, I hope the above content can be of some help to you, can learn more knowledge. If you think the article is good, you can share it for more people to see.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.