Shulou(Shulou.com)06/03 Report--

$lspv

Hdisk1 00c164fe384b126e rootvg active

Hdisk2 00c161aea0faa65d oradatavg concurrent

Hdisk3 none None

Hdisk4 none None

Hdisk5 none None

Hdisk0 00c164fe37b990cf rootvg active

$lsdev-Cc disk

Hdisk0 Available 0D-08-00-5 016 Bit LVD SCSI Disk Drive--- local disk

Hdisk1 Available 0P-08-00-5pm 0 16 Bit LVD SCSI Disk Drive

Hdisk2 Available 0A-08-01-01 e4000 Fibre Channel Storage--- optical disk

Hdisk3 Available 0A-08-01-01 e4000 Fibre Channel Storage

Hdisk4 Available 0A-08-01-01 e4000 Fibre Channel Storage

Hdisk5 Available 0A-08-01-01 e4000 Fibre Channel Storage

The actual size used for a physical hard disk is equivalent to the PPs allocated from that hard disk multiplied by PP SIZE.

# lsvg | lsvg-I-p

Use "TOTAL PPs"-"FREE PPs" to get "USED PPs", that is, the assigned PPs.

# lsvg | lsvg-I

Find the "PP SIZE" value for each VG.

According to the formula, the usage size of each physical hard disk is obtained.

For the size of the hard disk on the disk array, it generally refers to the size of the LUN.

4. HBA card information

# lsdev-Cc adapter | grep fcs

# lsattr-El fcs0

Check the physical slot of the HBA card, WWN:

# lscfg-vpl fcs0

Fcs0 U78A0.001.DNWK9W6-P1-C4-T1 FC Adapter

Network Address.10000000C9B54A92

Hardware Location Code.U78A0.001.DNWK9W6-P1-C4-T1

The above Network Address is the WWN of fcs0.

When the number of HBA cards is unknown, the following script can be used to collect the physical slot and WWN information of all HBA cards at once, which is very often used in projects.

Because the WWN of the HBA card needs to be collected for SAN switch configuration ZONE information, and the storage side also needs WWN for Mapping LUN:

Netstat-v en0 | grep-I speed

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.