Shulou(Shulou.com)06/03 Report--

How to solve the problem of teleconferencing jam? I believe most people haven't learned this skill yet. In order for everyone to learn it, I summarized the following contents for everyone. Without saying much, let's look down together.

Take Skype's teleconferencing diagram as an example. After a message is released from the server cluster, it can be transmitted to you through the Internet and then through its own business data stream.

We can't control the vendor's servers, but we can control our own networks.

The following remote conference pain points can be solved by yourself.

What about intermittent sound and video mosaic?

Meeting encountered "slow voice," do not panic, first check the next network problems.

If you are using a computer for remote meetings and are using Wi-Fi, it is recommended that you switch to a network cable because the Wi-Fi signal is poor.

After changing to a network cable, or not, then check the network cable interface and connection, whether there is loose.

After confirming that there is no looseness, it still does not work, that is, the net is convulsing.

There are two kinds of net convulsions, either your net is not good, or your colleague's net is not good.

If you can't control someone else's network, then control your own network.

The minimum standard for a local network is ADSL 2M bandwidth (Asymmetric Digital Subscriber Line).

If you don't, you'll have to lower the AV coding parameters.

Reduce the audio encoding parameters, you can do this: System-Audio Adjustment-Audio Encoding-6.6K.

When lowering video encoding parameters, you can do this: System-Video Settings-Video Capture Size-176 * 144.

To put it bluntly, it is like watching a video, 1080P too card, then change to smooth, although not very clear, but not "constipation" ah.

If you've been wronged, reduced the picture quality, or stuck.

Then look at your friends, whether there are too many movements in the video, whether his daughter-in-law and dog are walking in the video, then you can remind the other party not to move, there are fewer moving objects in the picture, naturally running more smoothly.

After the above operation, the effect is still not good, then you can download a real-time traffic floating bar, to monitor the network speed, after monitoring found that the bandwidth is obviously sufficient, but still stuck, it is likely to be the manufacturer's pot.

Your pot belongs to you, and the manufacturer's pot belongs to the manufacturer.

What if the network load is too high?

If you are using a local area network, after determining that the network is normal, check whether the traffic of the local area network is normal. If the bearer is too high, you can control the traffic of the local area network by reducing the IP call rate of the conference.

In addition, you can also turn on less cameras, if you have a meeting of ten people, there is no need to turn on the cameras, after all, everyone did not wash their hair. Who talks and who turns on the camera is the most suitable. When encountering network odd difference, you can also use small window video mode.

Open remote conference, you still hang game, big new year's we still don't do ha.

Most people's computer configuration is general, miscellaneous software also opened a lot, you do not card who card.

Finally, to a high-level version, suitable for programmers to operate.

In fact, the packet loss rate is too high, will also lead to the picture stuck.

If you have spare capacity, you can try to deal with the packet loss rate.

What if the packet loss rate is too high?

Packet loss rate, refers to the data packet in the data transmission process, because of the midway transmission, resulting in part of the data packet is lost.

It is also very easy to check the packet loss rate. Click "Start-Run" in the taskbar. On the Run dialog box, enter cmd command. After executing this command, you can open the command prompt. Type "ping [URL]" in the interface. The last line (x% loss) displayed is the packet loss rate of ping packets to the target address.

There are generally four reasons for high packet loss rates.

The first two reasons are force majeure,

The first reason is that the supplier's physical line failure, referred to as optical cable broken.

The second reason is routing errors, when the wrong path is taken in the network router, and the packet cannot be transmitted to the host database. But in this case, the missing data is so small that you can ignore it.

The third reason is equipment failure, which is divided into improper software setting, network equipment interface failure and fiber optic transceiver failure.

The fourth reason is network congestion.

The above is to solve the remote conference card Dayton problem in detail, after reading whether there is any harvest? If you want to know more about it, welcome to pay attention to industry information!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.