Shulou(Shulou.com)06/01 Report--

I. Network Topology

2. Fit AP WLAN data planning table

3. AP information table

IV. System platform

Fifth, configuration ideas

VI. Configuration steps

VII. Upgrade steps

Display version # check to see if the AC version is consistent with the AP version (the next package contacts the dealer)

Upgrade AC to the latest, mainly for later expansion (new AP version, not supported by AC)

Http://app.huawei.com/isdp

The serial number ESN of each device is unique. When applying for License, you need to provide the serial number of each device.

Maintenance-- > AC maintenance-- > component tags-- > ESN

Display esn # View the serial number of the device enter the device ESN-- > confirm activation-- > download the license file

Display sn license all looks at the serial number of the parts on the device

Software configuration backup

1. Licese also needs to be backed up

2. The purpose of backup is to restore network functions in extreme cases.

Display esn gets device SN

Display license state View license status

Display license revoke-ticket acquires license invalidation code

License active filename activates the License file to obtain the appropriate license

Display license [verbose] to view the License file information on the current system

Display license state to view the License status of a device

Display license state trial to view the remaining valid days of the License in the Trial state

Reset boot password reset the BIOS password to the default

Terminal monitor enables the terminal to display the information sent by the information center

Terminal logging opens the terminal to display log information.

System

Info-center enable # enable InfoCenter function

Sysname AC

Ftp server enable

Aaa

Local-user ftpuser password irreversible-cipher admin@123 ftp-directory sdcard:/

Local-user ftpuser privilege level 15

Local-user ftpuser service-type ftp

Quit

Wlan # the first way to upgrade AP

Ap update update-filename FitAD9430DN-24_V200R006C20SPC600.bin ap-type 52

Ap update mode ac-mode#AC upgrade method (upgrade AP version)

Ftp server enable

Wlan # the second way to upgrade AP

Ap update ftp-server ip-address XX.XX.XX.XX ftp-username huawei ftp-password cipher

Ap update mode ftp-mode FTP upgrade mode

Ap update update-filename FitAD9430DN-24_V200R006C20SPC600.bin ap-type 52)

8. Wireless configuration part

Vlan batch 100101 102 # create and manage APvlan 100decentralized business vlan 101interconnect vlan102

Dhcp enable # enable dhcp function

Interface vlan 100

Ip address 192.168.100.1 24

Dhcp select interface

Quit

Interface vlan 101

Ip address 192.168.101.1 24

Dhcp select interface

Interface vlan 102

Ip address 192.168.102.1 24

Dhcp select interface

Quit

Vlanpool vlanpool

Vlan 101 to 102

Assignment even | hash (default is hash)

Quit

Even assigns services to STA according to the launch order of STA VLAN,VLAN Pool tries to ensure that the number of IP addresses assigned by all vlan to STA is similar (but if the same STA is launched multiple times, the address obtained each time is usually different)

Hash allocates business vlan to STA based on the hash operation of STA's MAC address. As long as the vlan in the VLAN Pool does not change, usually STA will get the fixed service vlan,STA and will be given priority to the previously used IP address when it comes back online.

Int vlan 100 # set the address field of AP

Description Link-AP

Ip add 172.16.1.1 255.255.255.0

Dhcp select interface

Dhcp server excluded-ip-address 172.16.1.1

Dhcp server excluded-ip-address 172.16.1.254

Int vlan 101 # set up the business segment of the office

Description OFFICE

Ip add 192.168.101.1 255.255.255.0

Dhcp select interface

Dhcp server excluded-ip-address 192.168.101.1

Dhcp server excluded-ip-address 192.168.101.254

Int vlan 102 # Guest address Field

Ip add 192.168.102.1 255.255.255.0

Port-isolate enable # uses port isolation to prevent broadcast storms

[AC] vlan of AP address segment under capwap source interface vlanif 100s

[AC] wlan

[AC-wlan-view] regulatory-domain-profile name office-domain # create a domain management template

[AC-wlan-regulate-domain-default] country-code cn configures the country code of AC

[AC-wlan-regulate-domain-default] quit

[AC-wlan-view] ssid-profile name wlan-net creates SSID template

[AC-wlan-ssid-prof-wlan-net] ssid OFFICE configuration SSID name is "OFFICE"

[AC-wlan-ssid-prof-wlan-net] quit

[AC-wlan-view] security-profile name wlan-net creates a security template

[AC-wlan-sec-prof-wlan-net] security wpa-wpa2 psk pass-phrase 12345678 aes # WPA-WPA2+PSK+AES authentication mode password is "12345678"

[AC-wlan-sec-prof-wlan-net] quit

[AC-wlan-view] vap-profile name wlan-net creates VAP template

[AC-wlan-vap-prof-wlan-net] forward-mode direct-forward data forwarding mode

[AC-wlan-vap-prof-wlan-net] service-vlan vlan-id 101Service VLAN

[AC-wlan-vap-prof-wlan-net] security-profile wlan-net references SSID template

[AC-wlan-vap-prof-wlan-net] ssid-profile wlan-net references security templates

[AC-wlan-vap-prof-wlan-net] quit

[AC-wlan-view] ap-group name office-group create ap group name

[AC-wlan-ap-group-ap-group1] regulatory-domain-profile office-domain uses domain management templates under AP group

Warning: Modifying the country code will clear channel, power and antenna gain configurations of the radio and reset the AP. Continue? [Y/N]: y

[AC-wlan-ap-group-office-group] vap-profile wlan-net wlan 1 radio 0 references VAP template AP RF 0

[AC-wlan-ap-group-office-group] vap-profile wlan-net wlan 1 radio 1 references VAP template AP RF 0

[AC-wlan-ap-group-ap-group1] quit

The [AC-wlan-view] ap auth-mode mac-auth command is MAC authentication by default.

[AC-wlan-view] ap-id 0 ap-mac 60de-4476-e360 add AP

[AC-wlan-ap-0] ap-name area_1 AP configuration name deployment location

[AC-wlan-ap-0] ap-group office-group AP is added to AP group "office-group"

Warning: This operation may cause AP reset. If the country code changes, Whether to continue? [Y/N]: y

Commit ap 1 # devolves business to AP1

Maintenance-- > AC maintenance-- > system Administration-- > download configuration files

Maintenance-- > AC maintenance-- > system Administration-- > upload configuration file-- > AC restart-- > next startup configuration file-- > restart the device.

POE switch configuration

Interface GigabitEthernet0/0/2

Description link-AP # Port to connect to AP

Port link-type trunk # enables interface mode, which is deployed in a two-tier mode

Port trunk pvid vlan 100 # sets untagged vlan to pass for managing vlan

Port trunk allow-pass vlan 101 102 100 # allows business vlan and management vlan to pass through

Undo port trunk allow-pass vlan 1 # does not allow vlan to broadcast messages by reducing

Port-isolate enable # uses port isolation to prevent broadcast storms

Display ap run-info ap 0 to view the AP model software version

Display ap performance statistics ap-id 0 View AP memory usage

Display ap offline-record all views AP offline record

Diplay wlan config-errors # View the misconfiguration information of wlan

Display ap id 0 # View sn and mac addresses, launch status, domains, types, templates, etc., of a single ap

Ap-reset ap-id 0 # restart an AP separately

Display ap-type all View AP Typ

Ap-reset ap-type type-id 43 # restart a class of AP

Ap-reset ap-group default # restart a set of AP

Ap-reset all # restart all AP

Display ap update configure # View ap information

Display ap username # View the user name of logging in to ap

Display ap run-info # View the running information of ap

Display ap online-fail-record # View the record information of the failure to launch ap

Display ap-run-info id 243Query AP running information / ip address, software and hardware version, running time, speed

Display station status sta mac # query the status of sta based on mac

AP troubleshooting proc

Display ip pool name ap used looks at the address list obtained by AP

Display ap global configure to view current authentication mode

Display ap unauthorized record # View uncertified AP information

Reset ap unauthorized record # clear the information in the list of unauthenticated ap

Display access-user-num to view the maximum number of concurrent users and online users allowed in VAP

If AC is in layer 2 mode, AP is directly connected to AC. The mode is tunnel mode, and the terminal is isolated by default.

Reset saved-configuration cleanup profile

Y

Reboot

N

Y

6005 6605 supports POE function

Display ap-type all # View the AP types supported by AC

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.