Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, debug the sound card what song is appropriate, debug the sound card many people do not know, now let's take a look!

As we know, sound card is the most basic part of multimedia technology, and it is a kind of hardware to realize the conversion between sound wave and digital signal. So how to debug the sound card to achieve the best sound effect?

1. How to debug the sound card?

Innovative sound card debugging and installation steps

1. To check whether the innovative sound card Jack is connected correctly, you must first make sure that the line is correct.

2. [disable computer's integrated sound card] Click "my computer" and select "Properties".

3. Open the device Manager inside and click Sound, Video and Game Controller inside. The disabled sound card in the picture is "Realtek HD Audio" (Note: each computer may not understand it, it may be different when disabled.) Right-click to disable the sound card and restart the computer.

How to debug the sound card?

First install the hardware of the sound card, shield the original onboard sound card in CMOS (the original independent sound card can be removed), then enter CMOS to find integrated peripherals (integrated external devices), change the Auto behind the AC97 Audio to Disable, and then save the settings. Different CMOS names are different, and the most commonly used CMOS settings are provided here.

Then you can install the driver of the innovative 5.1 sound card. After the innovative 5.1 sound card driver is installed by default, you can start debugging.

(1) turn on the volume control of the small speaker at the rightmost bottom of the computer, and we will choose the following ones. Since others are of no use to us, it is suggested that you do not have to choose. Unless you are linear input, that is another problem! After selecting the playback control and the recording control, we don't need the controls in the small speakers below. If you don't think the sound is loud enough, click the advanced button under the microphone. Enhance 20Db. Pay attention to the high and low bass adjustment of the superior room under the playback control. It's useful for your own listening, but it's still the same as when you didn't tune it, so we generally don't tune it.

(2) start-program (all programs)-creativity-voice bully Live! -Creative Surround Mixer right-click and send it to the desktop shortcut. Because we often use the creative surround sound mixer, we recommend dragging it to the bottom shortcut bar. The following program interface appears:

(3) run the creative surround mixer program and the following interface appears. First click on advanced mode. The following 3 boxes without mute are not allowed to choose mute! Sometimes when you switch between the sounds you hear, the 3354 microphone will automatically mute the microphone, which is normal. Just mute the microphone. Button: the leftmost volume is the total volume control. Usually we choose the loudest, and the one next to the bass is the sound we listen to. It has nothing to do with what you pass on to others, so it's the default. Waveform / MP3 is a volume control that controls the volume of one's own music and the voice of others, which needs to be adjusted according to the volume of the accompaniment. The microphone monitors the sound of singing or speaking in the microphone itself. As long as the microphone doesn't scream, you can choose to turn it up. This is the last sound you hear. Here, be sure to choose the sound you hear, otherwise, even if you can hear the reverberation effect, what comes out still has no effect! The sound you hear is to control your volume when someone hears you singing, and has nothing to do with the music (unless you are an external VCD). As for MIDI,CD stereo, linear input, auxiliary equipment, CD number, phone answer, PC speaker is no longer used, whether it is muted or turned on.

(4) Open Settings. This is the effect setting. First, select "Custom" to change to "speak" in the middle box of the original sound (in Chinese). We don't have to modify it. The default value is 0.0DB, which is the maximum.

Reverberation: according to my own experiments, the effect of the auditorium is more appropriate, so choose this, the main reverberation pull at-14 (about). You can also choose your favorite reverberation effect, so the later parameter-14 is not necessarily.

Sound: there is no need to modify the type. By default, the integrated volume is turned down to-46 (which can be a little higher).

Echo: click add-Echo 3354 to confirm the effect you need to add yourself. It is OK to adjust the echo volume in the same position as the chorus, because what we do is the effect of the speech, so we can't do too much. Please don't talk and sing the same effect!

If it's not enough, I'll turn on the source.

This source setting is interesting. If you use your own effect to listen to other people's voices, you will hear sounds that have no effect. (don't you bring your own reverberation effect? How about listening to other voices that are as effective as you? You will think the effect is so great that you will tell others that you need to adjust your sound card.

In fact, it is you who need to adjust. If you choose source Wave/Mp3, you will hear other people's voices and your own accompaniment, and the original sound will remain 100%. Reverberation, chorus and echo are all adjusted to 0%

Final confirmation. Save!

You don't have to worry about listening to other people's effective voices anymore. Experiments show that your accompaniment will be particularly clear because it will not bring reverberation, chorus and echo.

When you finish speaking, sing, recite and host.

Do it on the same principle, so I'll give you a few parameters:

Singing: friends chatting in reverberation auditorium, please choose-5.2 chorus-30 echoes-30.

Recite: reverberation auditorium chat

Talk: reverberation Auditorium chat friends please choose-16 chorus-44 echoes-44

How to install the sound card

Start Control Panel under Settings on the start menu. Then double-click system. Open device Manager.

You will find several projects marked with this yellow "?" and a "!". What does that mean?

It turns out that Windows marks the hardware devices it does not know with such symbols, so it is more convenient to install drivers. The tips in the yellow part are generally different, so you don't have to pay attention to them.

You see, this project is called "PCI Multimedia Audio Device". They are the device names of the sound card. Let's delete this item before installing the sound card driver.

Click the first "PCI Multimedia Audio Device" item, then click the "Delete" button, a prompt appears, and click "OK".

Next we will install the sound card driver, the method is very simple. Click Refresh. Look, I found the new hardware right away. Click next.

To choose the way to install, let's use the recommended method and click next. We are asked to choose the location of the installer, we have selected the "specified location", we click "Browse" and find the sound card driver on the CD.

Open the SOUND directory. There is a directory for ESS1938, so select it. Select "Win200, or winXP or vista" again, and now the "OK" button becomes clickable. Once you have specified the location, you can click next.

You have found the driver for a device, which happens to be the sound card, click next. Start copying files, click "done" again. Other devices are found and drivers are installed automatically. It's done now.

Then how do we know that the installation has been successful? After installing the driver, there is already a "sound, video and game controller" item in the "device list", and there is an extra small horn on the right side of the "taskbar", which means that the sound card driver has been installed.

The sound card debugging method introduced above is more suitable for ordinary friends, of course, different wheat and different songs also need different adjustments. You can debug according to the actual situation to make the sound effect perfect.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.