Shulou(Shulou.com)06/01 Report--

This article will explain in detail how to create a router connected subnet. The content of the article is of high quality, so the editor will share it for you as a reference. I hope you will have a certain understanding of the relevant knowledge after reading this article.

Today we will create a virtual router "router_100_101" to get through vlan100 and vlan101.

Open the action menu Project-> Network-> Routers.

Click the "Create Router" button

Router is named "router_100_101". Click the "Create Router" button to confirm.

Router_100_101 created successfully.

Next you need to connect vlan100 and vlan101 to router_100_101. Click the "router_100_101" link to go to the router configuration page, and click the "Add Interface" button in the "Interfaces" tab.

Select the subnet_172_16_101_0 of vlan101 and click "Add Interface" to confirm.

Add the subnet_172_16_100_0 for vlan100 in the same way.

When you are done, you can see that router_100_101 has two interface, and its IP happens to be the Gateway IP 172.16.100.1 and 172.16.101.1 of subnet.

At this point, we can foresee: 1. Router_100_101 has connected subnet_172_16_100_0 and subnet_172_16_101_0. 2. The Gateway IP of two subnet has been set up on router_100_101. 3. Cirros-vm1 and cirros-vm3 should be able to communicate.

Pass the PING test.

Correct judgment. Cirros-vm1 and cirros-vm3 can communicate.

Look at the routing table of cirros-vm1. The default gateway is 172.16.100.1. At the same time, traceroute tells us that cirros-vm1 does access cirros-vm3 through router_100_101.

On how to create router connected subnet to share here, I hope the above content can be of some help to you, can learn more knowledge. If you think the article is good, you can share it for more people to see.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.