Shulou(Shulou.com)06/02 Report--

I have done such a case in my actual work, the company deployed the wireless ap of cisco, which is controlled by wireless ac and registered uniformly. Now, due to the insufficient wifi coverage of ap, the signal of ap in the corridor is blocked by the wall of the office, the building using reinforced concrete structure, or even a beam may block the signal, in view of the high cost of cisco wireless ap, and because of security reasons. Private wiring is not allowed, so I used a cheaper tplink router for bridging. After setting it up, I found that it actually showed bridging, but could not access internet. It was very strange. After I consulted the operator of a cisco device, he said that it could not be connected, and he needed to use two wireless bridges, one to connect to the switch, and one to put it in the office. This was too troublesome and the deployment was very inconvenient. Finally, I refused to drop it. Inadvertently, I found an article by Taishan it Studio about tplink wireless ap setting by bridging cisco without line, which suddenly enlightened me. After testing, I can achieve successful bridging and perfect access to the Internet.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.