Shulou(Shulou.com)06/02 Report--

This article shows you how to start the CVM, the content is concise and easy to understand, it will definitely brighten your eyes. I hope you can get something through the detailed introduction of this article.

In the state of server shutdown, direct power-up means that it is the incoming call self-starting function of the server. If there is no incoming call self-start, the server power supply case is a yellow indicator light, press the power button to turn green indicates that the power on.

What should I do if the CVM fails to boot normally? The train of thought of troubleshooting is to judge the software problem or the hardware problem first.

Check whether the boot button on the upper right or upper left of the front panel of the CVM is green. If it is not green, manually press the boot button or press the restart operation for a long time. Wait for 2-3 minutes to boot to check whether the connection between the terminal and the teacher program is normal:

1. The boot key of the CVM is green, and the student terminal and teacher terminal are still not connected to the CVM. Connect the monitor and keyboard to the CVM, and press enter key to check the system status of the CVM.

two。 If the CVM responds to the display screen, which shows a non-yellow-black interface, restart the CVM and press the delete key on the keyboard to enter BIOS to check whether the hard disk identification and startup items are normal.

The CVM connects to the monitor and presses the enter key of the keyboard without any response and cannot enter the BIOS. Troubleshoot the following hardware problems:

1. First check whether the memory strip of the CVM is loose, power off the CVM, remove the upper cover and heat dissipation shield of the CVM, then pull out the memory strips one by one, wipe the gold finger with rubber sassafras, and then reinsert the corresponding memory slot.

two。 If the cloud host system does not work, discharge the coin-sized button battery on the motherboard: unplug the button battery for 2-3 minutes, plug it back into the original position, and power up the cloud host.

3. If the CVM system still fails to work, pull the memory to only one, and if the CVM system can get up and start it again, if you find that it cannot be started after inserting a certain piece of memory, it will be the same if you try again and again. Then you can locate the problem with a single memory stick or a specific memory slot.

The above content is how to boot the CVM. Have you learned any knowledge or skills? If you want to learn more skills or enrich your knowledge reserve, you are welcome to follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.