Shulou(Shulou.com)11/24 Report--

In March this year, CTOnews.com shared the evaluation experience of searching for the M13 Beta floor washer. The flagship floor washer left a deep impression on me by virtue of the "all-in-one" experience advantage brought by the combination of vacuuming and floor washing.

Today's experience of this new product, although it does not have the M series of a machine "multi-form", but it will "wash the floor" this thing to the extreme, this is the pursuit of a new H-series flagship product-H30.

The search for H30 floor washer is in early September. The search for H30 floor washer has been put on the major e-commerce platforms.

According to reports, the H30 floor washer suction for 16000Pa, equipped with 5000mAh batteries and 900ml clear water tank, 700ml sewage tank, a charge can last 48 minutes, floor washing mode can be carefully swept three times less than 120mm Huxing, and a new LED lighting floor brush to facilitate dark area cleaning.

Not only that, the search H30 floor washer is also equipped with "the industry's first 60 °C hot water positive and reverse rotary washing and rolling brush technology", which "can quickly dissolve oil pollution and make rolling brush as clean as new", 360 °hot air fast drying technology brings a stronger self-cleaning experience in all directions. And the full-link sterilization function composed of ready-to-use electrolytic water, silver ion antibacterial rolling brush and silver ion antibacterial sewage tank.

These one-step deep cleaning functions also highlight the advantages of pursuing H30 in the competition with competitors.

CTOnews.com has got this new product, so how is the performance of looking for the H30 floor washer? Focus on "washing the floor" this thing on the pursuit of H30 floor washing machine, and whether to leave a deep impression on the author again?

With these curiosity, we enter the experience together.

First, in terms of design, the search for H30 floor washer continues the usual design style of the product, and the whole machine shape is not separated from the big frame of "floor washer", gray-black fuselage color matching, translucent clean water box, the product looks simple and slightly technical.

Of course, in terms of detailed design, there are many differences in the pursuit of H30 floor washer.

For example, in the bottom rolling brush area, the top rolling brush cover can be removed through the card buckle, so the advantage of this design is that if the rolling brush is stuck by larger garbage, then the rolling brush can be cleaned by removing the cover plate, and there is no need to remove the rolling brush completely.

When the cover plate above the rolling brush is removed, you can see the LED lamp integrated behind the rolling brush-the pursuit H30 floor washer adds a LED lighting floor brush to facilitate dark area cleaning.

Searching for H30 floor washer LED light on state in addition, the rolling brush of H30 floor washer also uses zero edge design, which can fit the corner, table corner, sofa leg and other corners that are not easy to clean.

The LED screen for the H30 floor washer is located at the top of the body, and the outermost circle is the working status light, which will change from green to orange when you encounter more rubbish and need more suction. If the environment is heavily polluted, the lamp ring will turn red.

The central area of the LED screen is a display of power status, while the four icons on the right show four working modes, including automatic, water absorption, sterilization and self-cleaning.

The buttons are concentrated in the handle area, which supports voice reminder function, and the status of the device can be known for the first time through voice.

Directly in front of the handle is the power key and mode switching button, the self-cleaning button is located behind the handle (back palm area), one click is 60 °C hot water self-cleaning, and twice is 60 °C hot water depth self-cleaning.

You may be curious about how the H30 floor washer can achieve "hot water" self-cleaning. In fact, it suddenly enlightens you when you see the base.

In the rolling brush self-cleaning area of the base, you can see a long strip of metal. This is the "PTC heating module", which can heat water up to 60 ℃.

This part is particularly helpful to the self-cleaning experience, which we will discuss in more detail later.

Self-cleaning base

The sewage tank of the H30 floor washer is located in front of the body, has a capacity of 700ml and supports silver ion antibacterial. Unlike other products, the H30 sewage tank uniformly mixes plastic particles with antibacterial masterbatch before injection molding, so that its silver ions are evenly distributed on the wall of the sewage tank, so that the antibacterial effect is more lasting.

The rear side is the 900ml super-large clear water tank, which also supports electrolytic water sterilization. In work, the clear water tank will produce a lot of small bubbles from the bottom up, which is actually the process of "electrolyzing water".

According to reports, the germicidal rate of the electrolytic water sought can reach 99.99%, and the inactivation rate of the virus is as high as 99.99%.

Second, cleaning experience to find the core of the floor washer H30 is to help you clean the floor thoroughly. So CTOnews.com focused on testing the "floor washing" ability of H30.

In the core parameters, the suction of H30 floor washer is 16000Pa.

Taking the kitchen as the scene, we simply simulate the common dry and wet garbage that is difficult to clean in the kitchen, including soup stains, fruit shells, bread crumbs, barbecue sauce and so on.

These rubbish are very picturesque in daily life, but cleaning with traditional brooms and mops is extremely troublesome. For example, wet garbage will pollute the broom twice, and the mop does not have the ability to "collect" the garbage.

The advantage of pursuing the floor washer H30 is very obvious.

As shown in the dynamic picture below, in the face of different types of dry and wet garbage, the pursuit of floor washer H30 is basically "one-off", and does not leave any trace, only light water stains prove that it has been here, the performance is very good.

Barbecue sauce sprinkled on noodles

Dry and wet rubbish such as cola, ketchup and bread crumbs is obviously not difficult to find the H30 floor washer, so step up your efforts.

For example, the larger leaves and peels of vegetables below.

The test results are also obvious-there is no pressure, even if there is a slight omission, and it has been cleaned up during the retractive process.

A little harder.

For example, in the picture below, there are spilled coffee powder, smoked tobacco, and smeared ketchup. In the test, it was originally thought that it would take several times to find the H30 floor washer to clean it up completely, but I didn't think that H30 still completed the task at one time. I can see that the ability to track down the H30 floor washer is really strong.

Finally, we spread some vinegar, soy sauce and ketchup on the floor and dry it with a hairdryer to freeze it on the floor as much as possible.

As shown in the picture below, the sauce is basically clean at once. As for the ketchup solidified on the floor, there is no need to worry, the high-speed rotating brush head will stay on the ketchup for a while, and then drag back, the floor has been clean.

These different difficult tests are also sufficient to prove the floor cleaning ability of the H30 floor washer.

For solid wood flooring families, it is really difficult to find the water absorption mode provided by the H30 floor washer.

As long as there is water on the ground, turn on the water absorption mode of H30, and under the blessing of rolling brush and high suction, the water stains will be absorbed directly, just like "evaporation".

Such as the bathroom, or even the balcony leaks on rainy days, the water absorption mode of looking for H30 can be of great use.

CTOnews.com also tested hair winding issues of concern, such as the long hair pictured below. After looking for the H30 floor washer to clean, open the brush cover, and there is no hair wrapped around the brush.

The bathroom is a place where hair is often "patronized", especially after taking a bath, the wet ground is easy to stick hair, firmly sucked on the ground, it is difficult to clean.

With the pursuit of H30, you don't have to worry.

We simply simulated the bathroom scene, sprinkled a glass of water on the scattered hair on the floor, let the hair "stick" on the ground, and then turned on the water absorption mode of searching for H30, in front of the high suction and high-speed rolling brush. the wet hair is also easily sucked into the dust box and the floor is clean.

During the CTOnews.com test, the H30 floor washer has not encountered hair winding problems, even if there is real hair winding, in the self-cleaning process, the H30 floor washer will clean itself by alternating front and back rotation and scraping.

Third, self-cleaning experience. Next, we need to talk about the self-cleaning ability of looking for H30 floor washer.

Traditional floor washers often have a problem, that is, although the floor is clean, the rolling brush has always been dirty, especially after dealing with some heavy oil pollution environment, even if there is self-cleaning, but the rolling brush is still "sticky". In the end, it had to be cleaned manually.

It can be said that just cleaning, regardless of the "aftermath", is a pain point for many consumers in using floor washing machine products.

Therefore, for rolling brush self-cleaning, looking for H30 floor washer first brought "60 ℃ hot water forward and reverse cleaning rolling brush" ability, why use hot water? Because hot water has a stronger ability to dissolve dirt.

To take a simple example, when washing dishes, the cleaning efficiency of hot water is much higher than that of cold water, because the higher the temperature of hot water and the faster the movement of water molecules, the easier it is to melt and spread the stain.

To make it easier for you to understand, CTOnews.com did a small experiment, as shown in the following two groups of gif.

In the first group, a small handkerchief covered with coffee liquid was thrown into cold water to simulate dirt.

As can be seen in gif, the coffee stain on the handkerchief does not dissolve obviously in cold water.

Cold water decontamination and the second group of gif, also covered with coffee liquid handkerchief into the hot water, you can see, after a few seconds, coffee liquid soaked in hot water, began to slowly flow out of the handkerchief, the stain has an obvious dissolution process.

This group of small experiments on hot water decontamination is enough to show that hot water has a stronger ability to remove oil.

This is the reason why we are looking for the "60 ℃ hot water rotary roller brush" pioneered by the H30 floor washer.

In the process of self-cleaning, looking for the H30 floor washing opportunity to wash and soak in a large amount of water, the PTC heating module on the base heats the self-cleaning water to 60 ℃, and the synchronous rolling brush simulates repeatedly rubbing and cleaning the rolling brush with 60 ℃ hot water by forward and reverse rotation, and then absorbs the sewage into the sewage tank by high suction. Over and over again, the rolling brush of the H30 floor washer will be cleaned more efficiently.

Through the thermal imaging image below, you can see the heating temperature of the base during self-cleaning, such as the area closest to the bottom PTC heating module, the temperature of the leakage part has reached nearly 40 °C, in fact, the temperature of the bottom heating area is higher.

Of course, users do not need to worry about this "high temperature", because it is equipped with intelligent temperature control protection configuration, which can ensure that the temperature is stable and controllable. At the same time, the base is designed with multiple protective materials to prevent leakage and high temperature damage.

"60 ℃ hot water cleaning" thermal image (just the temperature of the leaking area) in order to visually demonstrate the positive and reverse cleaning ability of hot water in pursuit of the H30 floor washer, CTOnews.com simply smeared ketchup directly on a clean rolling brush and then self-cleaned.

After the previous rotation, the ketchup has been completely smeared inside and outside the bristles.

Don't worry, after a period of hot water self-cleaning and drying, the original oil-stained rolling brush has been restored as new, which is enough to show the advantage of "60 ℃ hot water positive and reverse rolling brush".

So, with the "60 ℃ hot water forward and reverse rolling brush", even if you often deal with some heavy oil scenes, such as the kitchen, you don't have to worry that the rolling brush is always greasy, a self-cleaning and a blood-filled return.

When washing with hot water, the hair mentioned above on the rolling brush cover is "anti-winding". In fact, when the H30 floor washer is self-cleaning, the rolling brush will rotate alternately in a positive and reverse way, just like people use their hands to "scrub" clothes, driving them to rub from side to side, and finally achieve a cleaner effect.

The positive and negative transfer of the rolling brush is transferred to clean behind the rolling brush of the floor washing machine, and there is also a "constant pressure floating comb scraper". Press the scraper manually, you can see a certain floating space.

When self-cleaning work, this comb scraper will go deep into the root of the rolling brush, cooperate with the high-speed "positive and reverse" of the rolling brush, and finally bring out stubborn stains such as particles and hair.

After scraping, the rolling brush has obvious comb lines. In addition, when the rolling brush rotates, the bristles will be scraped back and forth by the scraping strips, and the bristles will also become fluffy and upright, rather than close to the rolling brush wall. more conducive to drying, eliminating odor and so on.

This design advantage will also clean the dirt left in the rolling brush cover and the internal cavity of the rolling brush in one step, including the base, which will also be clean after cleaning.

When it comes to the drying part of the cleaned base, the advantage of looking for the H30 floor washer is also very obvious. The traditional rolling brush "dehumidification" method is often natural drying, centrifugal drying, supporting drying, and the drying time is particularly long. Two hours and three hours is a normal thing.

Therefore, the search H30 can quickly dry the rolling brush, which means that even if you use the search H30 frequently, the rolling brush will always stay dry.

After drying the rolling brush in the drying process, the drying noise of H30 is only about 50 decibels, occasionally there will be one or two high-speed drying noise, which can be close to 60 decibels, but the duration is only one or two minutes, if placed on the balcony, or in the next room, the noise is basically negligible.

Fourth, the details experience in the experience of looking for the H30 floor washer in the process, some of its detailed design also moved me very much. For example, both sides use zero edge design, which can fit the corner of the wall, the corner of the table, the leg of the sofa and other corners that are not easy to clean.

For example, the addition of LED lights, cleaning under the bed, or in the evening cleaning work, hidden corner of the dust, stains, under the irradiation of LED are "exposed", there is no place to hide.

There is also an intelligent front and back two-way power function, which makes the use of the H30 floor washer more flexible and effortless.

I believe this part is also the doubt of many friends. After all, isn't it tiring for such a big guy to mop the floor back and forth in his hand?

This problem does exist, for example, on some single-roll brushing machine products, because the rolling brush rotates toward the front, then the user will obviously feel a forward traction when using these products, but when pulling back (pulling back), because of the existence of this traction force, you will feel extra resistance, so you can only drag forward, not back.

The search for H30 floor washer solved this problem.

According to the official introduction, it is the first time that the servo hub motor has been used in the floor washer in the industry, which is equipped with a sensor and a two-way power servo motor on the booster wheel, which can judge the magnitude of the boost according to the intelligent algorithm.

Looking for the H30 floor washer booster wheel close-up so, with the existence of this booster wheel, there will be no resistance to the H30 floor washer when pulling back, pushing forward and pulling back is equally flexible and easy.

In the process of experience, looking for the H30 floor washer is like holding a floor sweeping robot, and the weight is concentrated under the fuselage, so all you have to do is hold the handle and control the direction.

In the end, after this period of experience, it is time to make a simple summary of the search for H30 floor washer-this is a floor washer product that will mop the floor to the extreme, pure and "head-to-tail".

It joined the industry's first "60 °C hot water forward and reverse self-cleaning technology", allowing rolling brushes to solve the problem of "greasy" and "dirty". It is precisely because of the top self-cleaning ability of this industry that the H30 floor washer is more suitable for dealing with some heavy oil pollution scenes, and users do not have to worry about the "secondary pollution" of rolling brushes in the face of the "dirty" home environment.

Advantages such as two-way power driven by dual-motor wheels, intelligent dirt sensing, 48min ultra-long range, bilateral 0-edge design and other advantages also make the comprehensive experience of searching for H30 floor washer the first among all competitions.

To do one thing to the extreme is to succeed, as is the case in pursuit of the H30 floor washer.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.