Shulou(Shulou.com)06/01 Report--

How to configure LILO in Red Flag Linux system, in view of this problem, this article introduces the corresponding analysis and solution in detail, hoping to help more partners who want to solve this problem to find a more simple and feasible method.

In Linux, an important file used to achieve the coexistence of multiple operating systems is LILO. LILO is an acronym for Linux Loader and is used for multiple selections during system mount startup. If you have multiple operating systems installed, you can use LILO to choose which operating system to enter during the boot process.

Red Flag Linux Desktop version 2.4provides a graphical startup configuration tool "Klilo" that manages most of the properties of LILO with a friendly interface and easy to operate, but if you know a lot about LILO configuration, you can use manual configuration to configure your machine more accurately.

LILO can be modified by modifying the file "/ etc/lilo.conf". After the modification is completed, run the "lilo" command. In LILO, the typical boot mode consists of two parts: one starts with "image=" and is used to boot the Linux. The other starts with "other=" and is used to boot DOS or Windows.

The system that is booted by default in the LILO is the default boot system. If you want to modify the default boot system, you only need to swap the positions of the two parts.

When LILO boots the system, it usually displays some prompts on the screen first. LILO keeps this information on the screen for a period of time so that you can see it clearly.

Similarly, after modifying the file "/ etc/lilo.conf", you need to run the LILO command again for it to take effect.

In some cases, if the physical memory is greater than 64MB, Lilo may not detect all of the memory, but instead use the pre-64MB memory in the default configuration. You can know how much memory Linux uses with the following command:

$cat / proc/meminfo

If this happens, you can solve the problem by modifying the / etc/lilo.conf file. The specific method is to add a similar statement before the * image= statements of this file:

Append= "mem=xxM"

The xx here is the memory size of your computer in M bytes.

In order for the change to "/ etc/lilo.conf" to take effect, you need to rerun the command lilo to check for configuration errors, and then restart the machine. You can check whether the configuration is in effect with one of the following two commands.

$cat / proc/meminfo

$free

If you want to uninstall Linux, you can run fdisk / MBR under DOS or MS Windows to uninstall LILO. Then use fdisk to delete Linux partitions and reclaim hard disk space.

In Linux, an important file used to achieve the coexistence of multiple operating systems is LILO. LILO is an acronym for Linux Loader and is used for multiple selections during system mount startup. If you have multiple operating systems installed, you can use LILO to choose which operating system to enter during the boot process.

Red Flag Linux Desktop version 2.4provides a graphical startup configuration tool "Klilo" that manages most of the properties of LILO with a friendly interface and easy to operate, but if you know a lot about LILO configuration, you can use manual configuration to configure your machine more accurately.

LILO can be modified by modifying the file "/ etc/lilo.conf". After the modification is completed, run the "lilo" command. In LILO, the typical boot mode consists of two parts: one starts with "image=" and is used to boot the Linux. The other starts with "other=" and is used to boot DOS or Windows.

The system that is booted by default in the LILO is the default boot system. If you want to modify the default boot system, you only need to swap the positions of the two parts.

When LILO boots the system, it usually displays some prompts on the screen first. LILO keeps this information on the screen for a period of time so that you can see it clearly.

Similarly, after modifying the file "/ etc/lilo.conf", you need to run the LILO command again for it to take effect.

In some cases, if the physical memory is greater than 64MB, Lilo may not detect all of the memory, but instead use the pre-64MB memory in the default configuration. You can know how much memory Linux uses with the following command:

$cat / proc/meminfo

If this happens, you can solve the problem by modifying the / etc/lilo.conf file. The specific method is to add a similar statement before the * image= statements of this file:

Append= "mem=xxM"

The xx here is the memory size of your computer in M bytes.

In order for the change to "/ etc/lilo.conf" to take effect, you need to rerun the command lilo to check for configuration errors, and then restart the machine. You can check whether the configuration is in effect with one of the following two commands.

$cat / proc/meminfo

$free

If you want to uninstall Linux, you can run fdisk / MBR under DOS or MS Windows to uninstall LILO. Then use fdisk to delete Linux partitions and reclaim hard disk space.

This is the answer to the question on how to configure LILO in the Red Flag Linux system. I hope the above content can be of some help to you. If you still have a lot of doubts to be solved, you can follow the industry information channel to learn more about it.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.