Shulou(Shulou.com)11/24 Report--

Yingchi Xingyao series focuses on personalized customization, RGB and strong strength, bringing personality dazzling lighting effects for players and surging performance for the host computer at the same time.

Star Yao DDR5's new generation of memory has been fully launched, including elegant white and cool yahei versions, both of which are equipped with dazzling color controllable RGB transparent light guide stick, which can bring a fantastic experience for players who like pure white and black themes, respectively.

As a DDR5 high-frequency memory, Xingyao DDR5 series memory has a variety of 6000/6200/6400/6800MHz high-frequency specifications to choose from, a single starting capacity of 16GB, up to 32G*2 super-large capacity, timing as low as C32.

In addition, Xing Yao DDR5 memory uses Hynix A-die memory particles, which brings more possibilities for players to overclock manually. Let's take a look at it together.

Star Yao DDR5-6000 overclocking to 7600MHz

Previously, we tried to steadily overclock the Xingyao D5-6000 memory to 7600MHz. Although we can continue to overclock upwards, it is still not stable enough for daily use. This time we chose Xingyao D5-6400 memory and tried to stabilize overclocking to 8000MHz and meet daily use.

First of all, a brief introduction to the use of Xingyao DDR5-6400 16G*2 memory, after turning on XMP, you can automatically overclock to 6400MHz with a timing of 32-38-38-76 and a voltage of 1.35V, and then see if you can manually overclock to 8000MHz.

Adjust the memory overclocking to manual, pull the memory frequency to 8000MHz, manually set the timing to 36-48-48-78, and adjust the voltage to 1.5V. Without adjusting other small parameters, using the ROG APEX Z790 motherboard can easily boot and run stably, and boot normally after pulling up the frequency or lowering the timing again, but it is easy to crash when running some programs and games. Overclocking to 8000MHz is recommended if you want to achieve it in one step and use it steadily on a daily basis.

Star Yao DDR5-6400 overclocking to 8000MHz

After overclocking to 8000MHz, the read and write ability of memory is significantly improved, and the latency is lower. Of course, if the motherboard overclocking ability is general and difficult to start, you can try to relax the timing or adjust some small parameters.

Left 6400 frequency, right 8000 frequency

In the CSGO 2k game test environment, with the shadow RTX 4070 black OC graphics card, Star Yao D5-6400 average frame 555.78, overclocking to the 8000MHz average frame 561.13, improved by about 5 frames.

Left 6400 frequency, right 8000 frequency

In the "Wild Dart" 2K game benchmark, Xingyao D5-6400 average frame 139.7, overclocking to 8000MHz average frame 144.8, the improvement is not obvious, DDR5 high-frequency memory performance in the game can be regarded as a performance overflow, its creative design or large file copy compression gap will be more obvious, the improvement of game frames mainly depends on the graphics card.

When the timing voltage remains the same, it can also overclock to 8200MHz, but it is easy to flicker when running some games, so it needs to relax the timing to further improve stability, but it is of little significance to the daily use of small partners, normal overclocking 8000MHz is OK.

If you want to challenge higher frequencies (such as 8400MHz and above and running steadily), consider higher frequency Xing Yao DDR5 series memory or HOF PRO DDR5 series memory focused on overclocking.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.