Shulou(Shulou.com)11/24 Report--

Total of this article: 1432 words

Estimated reading time: 4 minutes

Hello, everyone. I'm Ann Ayn.

The chart brought by this issue is: radar chart.

Radar chart usually does not use a lot of opportunities, but it does not prevent us from learning how to make it, or collect it, or come back and turn it over when needed.

Next, let's take a look at today's three charts.

01. If the grid is not useful, the first radar picture is the first. You can't fill the grid with an ordinary radar map:

You can think about this: how to achieve the color filling effect in the picture?

If you haven't thought of it yet, look down.

The first step is to insert the chart-Select to fill the radar map:

Enter basic data:

Chart element uncheck the chart title and legend and try to increase the filling of gridlines:

Unfortunately, it can only format lines.

Therefore, we need to use a combination chart to add an extra fill effect.

Add four columns of data, decreasing edits from 10-4:

Then select the chart and select-change the chart type in the chart design.

Change all the chart types from Series 1 to Series 5 to fill in the radar chart:

Then set the fill color for each series, and click Mark-set solid color fill:

The prototype of the chart has been completed, continue to beautify ~

It can be observed that the original image also has a hollow circle mark:

Therefore, you need to add a column of auxiliary data that is the same as the underlying data:

Then change the chart type of the auxiliary column to a radar chart, or a radar chart with data tags.

Select the secondary column, click tag-tag option-built-in, change the type to circle, and the size is appropriate:

Set the fill of the tag to solid color, and the border color to orange:

At this point, the first chart is complete, and the final effect is as follows:

It's still interesting, isn't it? Let's take a look at the next one.

02. The different grid is slightly different from the previous chart, and the grid lines become round:

This kind of grid line is also not available in the radar chart itself. Think about it first.

If you don't sell it, let's disassemble it!

First, insert the chart-Select to fill the radar map:

Remove unnecessary chart elements and edit the underlying data:

The grid line cannot be bent. We can think about it. Is there a combination chart that is round?

Yes! It's a circle chart!

Next, enter the following three columns of auxiliary data:

Pie chart: the data is 10, as the maximum value of the radar coordinate axis (outer ring grid line), the fill is set to no fill, and the border is a light-colored line.

Figure 1 and figure 2 of the circle: set the color to the interval color and add the dotted border.

At this point, the prototype of the chart has been completed.

Next, additional auxiliary classification tags and shape modifiers are inserted:

The final results are as follows:

Did it ever occur to you that there are so many ways to play combination charts?

Let's take a look at the last chart.

03. The filling of polar coordinates in the third chart uses the polar effect, does it feel difficult:

In fact, it is the simplest of the three charts.

Next, take it apart!

First insert the chart-populate the radar chart and edit the data as follows:

Series 1: populated Radar Chart

Series 2: change the chart type to a radar chart, or a radar chart with a data tag

Then click the axis option and select the main tick line type-inside:

Delete unwanted chart elements, click the data on the axis, and set it to no fill in the text option:

Make the whole chart look refreshing.

Next, insert an additional gradient rectangle, and the first gradient aperture sets the transparency to close to 100%:

Use the OK plug-in one-click special effect-picture polar coordinate function to change the shape into the following appearance (first enlarge the shape beyond the canvas):

Then rotate the picture after the polar coordinates to 300 °, select the chart-picture or texture fill:

Then format the data series:

① tiles the picture into a texture

② alignment is centered

③ offset Y is 6.5lb.

The prototype of the chart is done, and then you can add a data label:

The effect of the finished product drawing is as follows:

Finally, let's review the knowledge points of the three charts:

01. Simulate gridlines using radar graphs

02. Simulate the grid using a combined chart

03. Fill a picture with polar coordinates

The above is the whole content of this chart tutorial.

This article comes from the official account of Wechat: self-discipline Rhythm (ID:yinlvPPT), by an Ayn

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.