Shulou(Shulou.com)06/01 Report--

The method of restoring factory configuration of convincing equipment

Method 1: the steps of restoring the factory configuration by short connecting the lan port and the DMZ port of the crossing line:

Step 1. Please turn off the equipment.

Step 2, use the crossing line to connect the LAN and the DMZ port.

Step 3, please turn on the equipment, the alarm light will always be on, and after it flashes normally, the factory configuration of the device will be restored successfully, and the factory-configured IP can be used to log in to the device normally.

Note: Kusa Technology reminds you that this method is only supported by AC devices!

Method 2: load the upgrade package with the upgrade client and restore the factory configuration:

Step 1: start the dlan gateway upgrade client, click upgrade package Management-load the upgrade package, and load the upgrade package consistent with the device version.

Gateway upgrade client download address: http://www.sinfors.com.cn/download/gw/2.7/FindmeClient.exe

Note: 1. Do not load the upgrade package when you cannot confirm the device version information, please contact 800 customer service for processing.

two。 The customized version of the device is best not to load the upgrade package at will, otherwise the customization function will be lost and become the standard version of the factory configuration.

Step 2, use the upgrade client to connect to the device.

Step 3, click upgrade-restore factory configuration. After waiting for a period of time, the factory configuration is restored.

Upgrade client to restore the default configuration procedure

Online behavior Management of AC

It is supported to restore with cross-line short connection between lan port and DMZ port, or to restore factory configuration after loading upgrade package with upgrade client.

SSL × ×, IPSEC × × [September 11, 2009]

Use the upgrade client to load the upgrade package and restore the factory configuration.

SSL device restore default configuration Note: due to the upgrade of the DLAN version, when restoring the factory configuration, please load the SSL upgrade package first. If the DLAN version is above 4.x, except for the SSL upgrade.

After the package returns to the default configuration, you also need to load the corresponding version of DLAN4.X to restore the default configuration.

WANACC WAN acceleration

After logging in to the page, click restore the factory configuration, or load the corresponding dlan module version of the upgrade package to restore the factory configuration.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.