Shulou(Shulou.com)11/24 Report--

Total number of words: 2980

Estimated reading time: 8 minutes

I want to take advantage of the Spring Festival to lie flat and watch a few movies, such as Wandering Earth 2, which I have been looking forward to for more than two years.

This is not New Year's Day movie will be released, so I went to brush the relevant information, found the following new movie posters:

Take a closer look, just this kind of double exposure effect we have not written, simply write a detailed tutorial, not only can teach a new method of double exposure, but also can ride the heat, good ~

If you don't know what double exposure is before this, you can search on Petal. com. There are many related artboards. Take a look and you will probably understand:

This effect is very simple to do in PS, usually just change the layer blending mode, or use a brush to smear the junction of two images, so that two different images can be merged with each other.

In PPT, it is still troublesome to make this kind of natural transition effect in any part, because PPT has no brush smearing-related function, and most of the translucent gradient effects of pictures are relatively stiff.

I also searched before writing this article and found that there are four ways to make PPT double exposure online:

01. Setting transparency directly to one of the images and covering it over the other image produces the worst results, with the transparency set almost impossible to see detail.

02. The figure figure will be extracted, and then set soft edge effect for the picture to be fused. The pictures obtained by this method are relatively clear, but the fusion effect of the two pictures is not good.

03. Take out the figure image, then use the OKPlus plugin's image transparency function, set the other image to a translucent gradient, and finally superimpose the two images together.

This method has a good effect, but the direction of the image translucency transition is very limited, and can only make the effect of linear transparency gradient, and can not make any region translucent transition.

04. First extract the figure image, then superimpose the two images together, select all and use the OK plug-in's image mixing function, such as superposition or color filtering.

The effect obtained by this method is relatively natural and cool, but the color and brightness of the image have a great influence on the final effect, and it cannot be customized and modified.

Next, I will teach you a new PPT double exposure implementation idea, after finishing the picture fusion effect is better, but also can customize the translucent area of the picture!

Okay, the text begins.

First, find a background image of the universe, stars, and a picture of a rabbit sideways from Freepik:

Then use the online photo tool to extract the rabbit:

If you haven't been exposed to this kind of tool before, you can search for "online photo editing" in AboutPPT navigation. I have organized a lot of related websites. Try it:

https://www.aboutppt.com/favorites/zaixianzuotu Then zoom in on the rabbit picture so that its head is in the right position on the page:

The approximate effect is as follows:

Select the rabbit head image and reduce its saturation to zero in Image Format-Color Settings:

Equivalent to doing the color removal process, the effect obtained is as follows:

Then select Film Grain in the Artistic Effects option and change the grain size to 70 so the rabbit looks grainy.

The effects are as follows:

Next, you need to make the light part of the rabbit brighter and the dark part darker.

You can increase the contrast by 30 percent and the sharpness by 10 percent in the image format settings:

At this point, the effect is as shown below, the contrast between light and dark is more obvious, and the hair looks clearer:

Then copy a page, superimpose the rabbit image above the sky map, and increase the transparency of the image:

The purpose of this step is to make it easier for us to draw the shape next, so that we can easily grasp which areas to show and which areas to hide (transparent).

Then use the Arbitrary Polygon tool and hold down the left mouse button to draw the rabbit area you want to keep:

Note that the areas you want to keep can be modified to your liking, and other areas will appear transparent or translucent.

Then, from the cloud-free materials we shared before, choose a cloud map with smooth edges:

Drag it into the PPT page, pay attention to the checkbox in the picture below. The cloud image at the top of the right side is the actual size, and the cloud image at the bottom has been reduced in size and modified to 80% transparency:

The goal is to make the transparency and shape transition of clouds more natural when multiple clouds are stacked later.

Next, change the area drawn with arbitrary polygon to white, the transparency can be set to 5% or 10%, and then copy the cloud image with high transparency and superimpose it on other areas of rabbit head:

When copying, you can use a shortcut operation, that is, hold down Ctrl, drag the picture directly and release it, so as to quickly copy.

Note that the edges of the white area are too stiff, so that even if the processing is completed, the fusion between the rabbit image and the starry sky is not good, and the transition is not natural.

Therefore, you need to copy a lot of cloud images, change the size and rotation angle, cover the hard edges, and make the white transparency transition more natural:

This step is actually simulating brush painting in PS, using clouds as brushes, copying and superimposing as repeated painting of brushes, modifying the transparency and size of cloud images, in fact, modifying the size and flow of brushes.

If you want an area to be more transparent, put fewer clouds. If you want an area to have more rabbit fur, put more clouds on it to make it more white.

Let's see how many clouds there are at this point:

Combine these cloud and white shapes and convert them to images in-situ with the OK plugin.

Next, copy the sky diagram, fill it in as the slide background for the page, and copy the previous gray rabbit to the top of the page:

Note that because the rabbit is free at this time, the edge will show white clouds below.

Select the rabbit image, open the image format settings, set it to slide background fill, that is, fill the starry sky:

At this point, look at the picture above. It is slightly different from before filling. The white around the rabbit is blocked.

Here comes the point! At the same time, select the image converted from the previous cloud combination and the rabbit image, and use the OK plug-in image mixing function to stack the bottom function:

Note that the rabbit diagram should be located at the upper layer of the cloud diagram. Select the rabbit diagram first and then the cloud diagram below. At this time, you can open the selection pane, which is more convenient to select.

After the operation of the plus film bottom, delete the picture below, and the effect is as follows:

As you can see, the more white the area was, the less transparent the rabbit was, and the less white the area was, the more transparent the rabbit was, and the more stars were displayed.

We copy several rabbit images in situ, adjust the transparency of the images separately with OKPlus plug-in, and stack them together to get the following more natural effect of transparency transition:

At this point, the double exposure effect is already done.

Next, from the light-free materials we have shared before, select some light effects and add them to the page, adjust the size, transparency, artistic effect and position, and enrich the details of the page:

After adding the light effect material, the effect obtained is as follows:

Finally, simply typeset the text content and further enrich the details of the light effect. This page is completed:

The final effect is slightly different from the poster of Wandering Earth 2. One is that there are more areas reserved for rabbits, and the other is that the overall color adjustment is not further adjusted to cyan. If you are interested, you can make a page correction.

This article comes from Weixin Official Accounts: Self-disciplined Music (ID: yinlvPPT)

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.