Network Security Internet Technology Development Database Servers Mobile Phone Android Software Apple Software Computer Software News IT Information

In addition to Weibo, there is also WeChat

Please pay attention

WeChat public account

Shulou

Principle of Huawei battery recharge password (Huawei battery recharge password)

2025-01-29 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Mobile Phone >

Share

Shulou(Shulou.com)05/31 Report--

Audio commentary

Hello, everyone. The meeting will answer your questions. Huawei battery recharge password principle, Huawei battery recharge password this many people do not know, now let's take a look at it!

Answer:

1. The start-up password for Huawei phone is * 2846579boot password. In Huawei's engineering mode, powering up means battery correction to keep the existing battery in line with the phone's display. Startup is a test setting when the phone leaves the factory. In order to ensure the normal use of the phone, it is recommended not to modify the setting in the project menu. This setting has no effect on the phone.

2. Why do mobile phones need to be recharged?

3. After using the mobile phone for a long time, the battery will become less durable. First of all, it is caused by the aging of the battery and the decline in capacity. On the other hand, the virtual power of the battery is high and the utilization rate of battery capacity does not reach the maximum capacity. All smartphones use lithium batteries, and their normal service life is about 500 times longer than that of full charge and discharge. After reaching this number, it does not mean that the battery can not be used, but the attenuation loss will gradually increase, seriously affecting the use experience. The most obvious performance is the reduction of charging time, the serious reduction of mobile phone use time, and the phenomenon of blackout (the battery soared by 100%). The power supply is a test setting when the phone leaves the factory. In order to ensure the normal use of the phone, it is recommended not to modify the setting in the project menu. This setting has no effect on the phone. The power supply function is designed to ensure that the factory power is between 60% and 75%. There is no power calibration function. In the charging interface, you will be prompted to charge when the battery is less than 60%, and will automatically stop charging when the battery is higher than 75%. After exiting the charging interface, the phone can return to normal. Keeping the battery charge in the medium range for a long time is more beneficial to extend the battery life. At the same time, you need to make sure that the battery is moderate when you pick up the phone. Therefore, the power of the factory is controlled at about 60%, 75%.

This is the end of this article. I hope it will be helpful to all of you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.

Views: 0

*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.

Share To

Mobile Phone

Wechat

© 2024 shulou.com SLNews company. All rights reserved.

12
Report