Shulou(Shulou.com)11/24 Report--

Sometimes when we take pictures, either because the shutter speed is too slow, or because the object moves too fast, the picture accidentally pastes and a shadow appears.

When this happens, don't delete it in a hurry, try the anti-shake filter in ps to fix the photo.

Here is a picture of the paste:

Here are the restored photos:

Ps anti-shake filter is a built-in filter for ps and does not require additional installation. Open the menu bar filter, sharpen, anti-shake, ps will automatically identify blurred areas, giving a default adjustment effect.

At this time, a small quadrilateral box appears in the photo, which can be adjusted in size and position. what is in the box is the identified blurred area. Ps will set an adjustment standard according to the blur in the box. There are various parameters on the right, which can be adjusted slightly.

If you are not satisfied with the identification area, you can use the mouse to draw another one. There is also a picture frame on the right that can control the direction, similar to the reverse motion blur function. The newly drawn box appears on the right. Multiple frames adjust the picture at the same time, and you can choose to activate or close it or delete it on the right.

In general, you can use multiple frames at the same time, or you can use one frame for each layer, and then use a mask to select the desired area to piece together.

As a remedial tool, anti-shake filter can only be used as a last resort, and its degree of repair is limited. Therefore, when taking pictures, we should try to hold the camera as steady as possible, so as not to make the photos blurred. There is a saying that it is better to be noisy than blurred. It is better to open a high feeling than to speed up the door.

7 ways to prevent photo blur ① safety shutter if your equivalent focal length is 200mm, the safety shutter should theoretically be faster than 1pm 200 seconds, remember the calculation method of this safety shutter. Increase the shutter speed, this is the most effective way.

② anti-shake function many bodies and lenses have anti-shake function, the effect is good after opening, you have to use it when you need it.

③ hands should be steady when taking pictures, don't wiggle around, hands must be steady.

If the ④ tripod is on the tripod, it will be stable. The shutter of tens of seconds will not burn. But remember, when the camera is steady, turn off the anti-shake.

Don't touch the camera when ⑤ takes a picture. Sometimes, the camera is steady, and when you press the shutter with your hand, it shakes, so don't touch the camera. It is a good way to use shutter line, remote control, regular shooting, and SLR to open the reflector to pre-lift.

⑥ large aperture lens / high sensitivity fuselage has a large aperture lens, which can improve the shutter a lot. The high sensitivity of the fuselage is good, and the sensitivity of more than 20,000 can be seen, which can also improve the shutter a lot.

⑦ post-repair photos have been pasted, so use the method mentioned in this article to fix it later.

This article is from the official account of Wechat: photography Research Society (ID:shoujiPhotography), by Zhang Xiaozhang.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.