Shulou(Shulou.com)06/02 Report--

Editor to share with you how to insert the server memory stick, I believe that most people do not know much about it, so share this article for your reference, I hope you will learn a lot after reading this article, let's learn about it!

Server memory bar insertion method: 1, rack server memory bar installation, carefully watch the number, corresponding to insert memory bar; 2, blade server memory bar installation, blade server has only 8 slots.

How to insert the server memory stick:

Installation of memory bars for rack servers

The first thing we need to know is that the installation of server memory strips usually has a numbering order, which is usually a combination of numbers and letters. In fact, we just have to install it in order. For rack servers, it will have 2 cpu, a total of 12 memory, and there will be a number on the lid of the memory slot. We just have to watch the number carefully and insert the memory stick. Check whether the memory bar is complete and not bent before installation, then press the buttons on both sides of the card slot and gently install the memory bar, but it will be fine, but if it is installed to see if it will be loose, it will be installed normally. Note, however, that when we install sticks of memory, the number of sticks of memory on both sides of the cpu should be the same. If you encounter an odd number of memory, it is best to install it on cpu1.

2. Installation of blade server memory bar

Blade servers and rack servers are installed in the same way, except that the blade server has only eight slots, so it can expand the memory relatively much less than the rack server. Its installation method is generally as follows: first, press the opening buckle to take out the blade, and then we see the round button, press the button, and pull the lid off the card slot in the direction indicated by the arrow. Similarly, you can see the server number on the cover, press the buckle and insert the numbered memory into the card slot. There is no need to move the buckle, he will fasten it himself. In this way, the memory bar of the blade server is installed.

Matters needing attention during installation

Although it seems that the installation of the server memory bar is not that complicated, it is best to pay attention to it when installing it. First of all, be sure to check that the memory bar is intact and not bent before installation, otherwise, it is useless for a bad memory stick to be installed. Second, pay attention to the installation. Whether it is to open the buckle or press the buckle should be gently, do not force too hard, damage the server. Finally, I would like to remind you that after installation, check to see if the memory bar will be loose.

The above is all the contents of the article "how to insert the server memory stick". Thank you for reading! I believe we all have a certain understanding, hope to share the content to help you, if you want to learn more knowledge, welcome to follow the industry information channel!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.