Shulou(Shulou.com)11/24 Report--

Recently, CTOnews.com got the mechanic's latest PC game console: the mechanic Future Battleship Ⅲ game console, which uses a new appearance mold design and can be equipped with up to 13 generations of Core K series standard pressure processors or RTX40 series graphics cards. Next, I will bring you its out-of-the-box picture.

Mechanic Future Battleship Ⅲ game console positioning high-end, with its own ID patent, box size of 58L, all-tower, C-shaped surrounding structure, the shape compared with the previous generation and the ghost fighter series is more round, the fuselage line is more simple.

The mechanic Future Battleship Ⅲ game console is inspired by the sci-fi style starship ship, which uses black grille, silver shell and transparent toughened glass to highlight the mystery of futurism. The iconic grille design on the front of the fuselage has been greatly adjusted and enhanced, reconsidering the grille area, visual share and styling layout.

The cascade grille extends from the top of the machine to the front and bottom of the chassis, and a long, frosted "floating island" interface board is designed on the right side of the top, with a USB-C port, an 3.5mm headphone port, two USB-A ports and a restart button.

Mechanic Future Battleship Ⅲ game console in the front upper left corner is a hollowed-out processing, with the mechanic Logo boot button, when the computer starts, Logo will light up the RGB light effect, next to the "floating island" interface board extending down the gradient light belt also lit up at the same time.

The straight waterfall grille is cut diagonally by a wiredrawn bezel in the lower half of the fuselage, leaving only a small section to continue to the bottom of the chassis, which is also equipped with a RGB light strip.

Many holes are hidden on the inside of the grille, and as long as the computer is running under high load, the hot air inside the chassis will blow out of the fuselage through the holes in the grille.

There is a raised handle above the toughened glass door of the future battleship Ⅲ game console. Just remove the nut on the right side of the back of the machine and pull the handle back to open the magnetic side penetration door.

The interior of the chassis is divided into upper, middle and lower parts, the top three cooling fans with RGB beads, the larger black motherboard, the 360water cooling of logo and RGB lighting effects customized by the mechanic, and the memory strips of 2 RGB vest shells.

In the middle of the chassis is a RTX3080Ti graphics card, which supports RGB lighting, is placed horizontally, and is equipped with a graphics card bracket to prevent possible motherboard deformation caused by long-term use.

The lower part is an independent lower power warehouse, built-in 850W blackening power supply, independent cooling duct design.

There are I / O interface bezel, fan air inlet and graphics card interface board, power interface, power supply independent switch and power supply cooling opening on the back of the chassis, all of which are standard configurations.

The rear side of the top of the chassis is equipped with a hidden design of the flip door structure handle, which can be opened by pressing the upper part of the baffle, at the same time, it can increase the air intake and improve the heat dissipation efficiency.

According to the official introduction, the chassis of the future warship Ⅲ game console of the mechanic has the following design in terms of compatibility, with the top supporting 120/240/280mm cold row or 2 12cm / 14cm cooling fans, and the front supporting 120/280/360mm cold row or 3 12cm / 14cm cooling fans. Radiator height limit 165mm, maximum video card length 330mm, support the highest ATX motherboard, tool-free hard drive rack in the bottom hard disk compartment area, support two 3.5in hard drives, backplane supports two 2.5in hard drives.

In terms of configuration, the mechanic has a rich choice of future warship Ⅲ game consoles. CPU supports 12th-generation and 13th-generation Core i5 / i7 / i9PowerGPUs to support RTX30/40 series of 70TiGrain80 and 90Journal CTOnews.com this time it is a combination of 13th-generation Core i7-13700K processor and RTX3080 graphics card, the price is 17999 yuan, the specific configuration is as follows.

For more pictures:

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.