Shulou(Shulou.com)06/01 Report--

In this issue, the editor will bring you about the treatment of "Windows can not complete the format" when formatting U disk. The article is rich in content and analyzed and described from a professional point of view. I hope you can get something after reading this article.

Sometimes, when we need to format a U disk, the system will appear "windows can not complete the format", when we encounter this problem, how do we deal with it?

1. First of all, let's connect the flash drive.

two。 Press and hold WIN+R to bring up the run window or click the menu bar below, or click run. WIN is the button on the keyboard between CTRL and ALT. After calling up, enter CMD.

3. When you are sure, the DOS window will pop up, and we enter the command format H:/fs:fat32 on it because my USB drive letter is H, so there is H after format. If you have something else, just change H.

4. Press enter when you are ready. It can be formatted. It will take about five minutes.

5. When the formatting is complete, you will be prompted that the formatting is complete.

Congratulations, the USB flash drive has been formatted, isn't it very simple? In the daily use of U disk, we still try to reduce the bad habit of unsafe exit to unplug U disk. After all, the damage to U disk will basically cause the loss of data, and if you really lose something important, the loss will outweigh the gain.

The above is the editor for you to share the format U disk when the "Windows can not complete the format" is what is the way to deal with, if there happen to be similar doubts, you might as well refer to the above analysis to understand. If you want to know more about it, you are welcome to follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.