Shulou(Shulou.com)05/31 Report--

192.168.1.1 Mobile phone login entry

To log in to the 192.168.1.1 page using your mobile phone and set up a wireless router to surf the Internet, you need three steps:

1. Router connection

2. Mobile search connects to the router wifi.

3. Set up a router to surf the Internet

Step 1. Router installation

(1) telephone line surfing the Internet: users need to prepare a network cable to connect the WAN interface between ADSL Modem (cat) and wireless router.

(2) Optical brazing: users need to prepare a network cable to connect the WAN interface between the optical cat and the router.

(3) Network cable to access the Internet at home: directly plug the home network cable provided by the broadband operator to the user's home into the WAN interface of the router.

Step 2. Connect the phone to the router WiFi

Please turn on the wireless function on your phone and search for and connect to the wireless WiFi signal on your router. This is a very important step. (PS: when the wireless router leaves the factory, the wireless WiFi function is enabled by default, and there is no password, so you can connect directly.)

Step 3: set up a router to surf the Internet

(1) Open the browser on the phone and enter: 192.168.1.1 in the address bar to open the settings interface. (if you can't open it after typing 192.168.1.1, please click to read the article: 192.168.1.1 the solution to which the mobile phone landing page cannot be opened)

(2) fill in the user name and password and log in to the router settings page

Pay attention to the problems:

Some routers now do not have a user name or password; when you open the 192.168.1.1 page for the first time, you will be prompted to set an administrator password before you can log in to the settings interface.

(3) run the setup wizard: you can click "setup Wizard" in the left menu to run it.

(4) choose the way to access the Internet: select "PPPoE (ADSL Virtual dialing)"-> Click "next".

Select PPPoE (ADSL Virtual dialing)

(5) configure broadband account and password: enter the broadband account and password provided by broadband operator-> Click "next".

Set the correct broadband account and password on the router

(6) configure the wireless network: "SSID" is the wireless network name. Users set it according to their own needs-> check "WPA-PSK/WPA2-PSK"-> set "PSK password"-> click "next".

Restart the router: click "restart"-> Click "OK" in the pop-up dialog box.

(8) after the restart is complete, log in to the settings interface of the wireless router again, click "running status"-> View "Wang Port status". If it shows that you have obtained the IP address and other information, as shown in the following figure, it means that the setting is successful and you can surf the Internet normally.

Pay attention to the problems:

(1) different brands of wireless routers, 192.168.1.1 settings page will be different, we should learn to use flexibly. Remember the core steps: install the wireless router-- > search for wifi signals connected to the router-- > set up the router to surf the Internet.

(2) when the router is set up to access the Internet, no matter what brand of router, there will be a choice of access to the Internet; there are three ways to access the Internet: 1, PPPoE dialing (ADSL dialing, broadband dialing); 2, dynamic IP (automatic acquisition, DHCP); 3, static IP (fixed IP).

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.